ADHESIVES
KEYSTON CONTACT CEMENT
A general purpose neoprene adhesive for bonding fabrics and vinyl to metal. Especially formulated for automobile landau tops. #ADH105P 5 gallon pails
WELDWOOD LANDAU TOP & TRIM ADHESIVE
Release point approximately 250° ADH234G5 ADH00237P Natural Red 5 gallon pails
WELDWOOD SOLVENT HH-66 VINYL CEMENT
Really Works
A water clear blend of selected solvents. Uses include:
HH-66 is the Problem Solver – exceptionally strong, waterproof, flexible bonds for vinyl coated and vinyl laminated fabrics. HH-66 applies easily, dries very quickly for efficient fabrication. Outstanding resistance to oil, fuel, grease, chemicals, and weather extremes. Use HH-66 for making or repairing tarpaulins, truck and pool covers, tents, awnings, liners, upholstered furniture. HH-66 belongs in every vinyl repair kit. Also excellent for sealing stitched seams – dries clear and non-tacky.
ADH66HHP ADH66HHQ ADH66HHG 8 ounces 1 quart 1 gallon Brush Top Can Brush Top Can 50 per case 18 per case 06 per case
3MTM TOP AND TRIM ADHESIVE
A powerful contact adhesive for adhering vinyl tops. Is easily brushed or sprayed on and won’t “grab” until firmly pressed in place. No staining of the vinyl or bleed through. Also ideal for various interior trim applications. ADH-8046 1 5 gallon pail
Auto & Marine
This landau top and trim adhesive is a high-heat resistant adhesive used for landau tops, headliners, and all trim purposes. This adhesive is homogenized; therefore it should not be thinned nor agitated. There will be no solids or sediments settling to the bottom of the glue pot, so the lines should stay clear.
ADHESIVES
DAP WELDWOOD
LANDAU TOP & TRIM ADHESIVE
K-GRIP SOLVENT CEMENTS
For the Professional Upholsterer
Auto & Marine
Used in the upholstery and furniture industry to bond foam to fabric, foam, dacron, plastic, vinyl, wood and many other materials where a strong yet soft glue line is required. For bonding Landau tops constructed of non-penetrable fabric backings. Van conversion applications include plastic laminate, wood, particleboard, paneling, plywood, paper honeycomb, urethane foam, aluminum, mild steel and many other materials. Red or Clear
• • • • •
Excellent heat resistance Excellent chemical and water resistance Bond strength increases with age Up to 3 hours open time May gel if stored at low temperatures but returns to normal viscosity at 70° F. Overdried adhesive may be reactivated by applying another thin coat of adhesive. ADH233G Gallon – 4 per case
3MTM FAST TACK TRIM ADHESIVE
• Extremely fast drying light amber adhesive • Especially good for adhering overhead • • • • •
trim such as headliners Light non-staining color Gains high strength in seconds Permits repositioning Sticks to a variety of surfaces Will not stain vinyl 5 oz. Tube for bonding trim fabric
3MTM SUPER WEATHERSTRIP ADHESIVE
• Bonds all types of gaskets to painted or • • • • • • •
unpainted metal surfaces Adhesive stays permanently flexible and rubbery, never dries out or becomes hard Easy to brush and spread Extremely fast drying Exceptional bonding strength Waterproof Flexible (rubbery) Resists oil, grease and solvents 5 oz. Tube Color: Yellow 5 oz. Tube Color: Black 6 Tubes per Case 6 Tubes per Case
#08031
6 Tubes per Case
ACID SWABS
A stiff black horsehair brush used to apply adhesives to all surfaces. TOL1AS A = 6″ B = 3⁄ 8″ C = 3⁄ 4″ (1 Gro Box) TOL2AS A = 6″ B = 1⁄ 2″ C = 13 ⁄ 16 ″
#8001 #8008
2
ADHESIVES
INSTANT ADHESIVE ALTECO-WOODY SERIES
For wood and porous surfaces.
Wood is a porous substrate and absorbs adhesives quickly. AltecoWoody was developed to overcome this defect and has high bond strength not only to wood, but also to leather, paper and synthetics.
12
Waterproofs seams on all types of outdoor fabrics
• Unique applicator—forces sealant
ADH100WP ⁄ oz. bottle 12 per case
ALTECO-ACE-D
for EPTR, EVA, Soft PVC
Compared with other rapid cure Cynaoacrylates, ACED shows remarkable cure speed to bond difficult surfaces such as EPT, EVA, PVC, polyacetal and platings while producing an excellent and tough cure. ADHW200NP
12
3MTM GENERAL PURPOSE ADHESIVE CLEANER
• Specially blended solvent • Provides easy cleanup of most • Quickly removes waxes, road tars, • Will not harm most thoroughly
grease, oil and similar materials cured automotive paint, vinyl or fabrics when properly used
Quart Can 5 Gallon Can 15 oz. Aerosol 6 per case 1 per case 12 per case
⁄ oz. bottle
12 per case
types of adhesives
CLEAR LIQUID VINYL REPAIR
Guaranteed “indestructible vinyl repairs”
VLP fuses torn vinyl together without heat or patch. Easy to use—just apply and let dry. Forms a nearly invisible repair that is guaranteed to be stronger than the original vinyl. Use on seat cushions (cars, trucks, buses, boats, snowmobiles), indoor and outdoor furniture, restaurant booths, bar stools, boat tops, tarps, awnings, athletic bags, luggage, swimming pool liners, jackets, rainwear, air mattresses, bean bag chairs. ADHVLP1 1 oz. Tube on a Card (12 per box)
#8984 #8986 #8987
JIFFYTEX
A pure natural latex that dries fast. Will not crystalize or crack with age. Used for bonding fabric to fabric. #ADH102Q Quarts 12 per case
3
Auto & Marine
into needle holes and seam where it is most effective • Durable; excellent adhesion. Bonds to most fabrics. Expands up to 500% under stress • Weather-resistant; remains flexible in sub-zero temperatures. Lasts for many seasons • Colorless—dries clear, blends with all colors. • Economical 2 oz. bottle seals 140 feet of single and double stitched seams
ADHESIVES AUVECO
3MTM SUPER TRIM ADHESIVE
A fast-acting, high strength aerosol contact adhesive designed for twosurface application.
KEYSTON BLACK LABEL PREMIUM SPRAY ADHESIVE
This wide web spray adhesive is one of the highest performance aerosol adhesives available. For both temporary or permanent bonding, this high solids product is ideal for uneven or porous surfaces and various weight materials. Waterproof, flexible, transparent, nonstaining. Use this product for your toughest adhesive applications with materials such as leather, cardboard, most plastics, foam and cloth. ADH4795 16 oz. 12 per case
Auto & Marine
• Resistant to heat and plasticizing oils. • Bonds can be made within minutes or as long as one hour after application. ADH8090 18 oz. 6 per case
3MTM GENERAL TRIM ADHESIVE
A convenient sprayable adhesive used for bonding a variety of trim fabrics. • • • • • Controllable spray pattern. Non-misting. No agitation of can is required. High strength. Light color 16.25 oz. 6 per case
HI-TEMP HEAVY DUTY TRIM ADHESIVE
A contact adhesive designed for bonding vinyl tops, heavyweight headliners and hood silencer pads where high strength and heat resistance are needed. ADH92A 13 oz. 12 per case
ADH8088
3MTM SUPER 77 SPRAY ADHESIVE
Fast, aggressive tack for bonding most lightweight materials. An extremely versatile clear adhesive. ADH77 16.5 oz. 6 per Case
KEYSTON HI-TEMP HEAVY DUTY TRIM ADHESIVE
Bonds to metal, wood or plastic foam, headliner, carpet, insulation material. ADH092 13 oz. 12 per case
KEYSTON GENERAL PURPOSE ADHESIVE
The best way to make permanent or temporary bonds to most surfaces such as wood, paper, metal, urethane foam, etc. It’s water resistant, presents a fast tack and in most cases won’t wrinkle a porous surface. ADH4011 12 oz. 12 per case
4
AUVECO
Door Flange Weatherstrip
GM, Ford & Chrysler Cars & Trucks #4675
Unit Pkg. 50 Ft.
Trunk & Rear Deck Gutter
Weatherstrip: GM #4703
Unit Pkg. 50 Ft. Unit Pkg. 15 Ft.
Closed Cell Sponge Rubber Windlace Cord
Unit Pkg. 15 Ft.
Door Flange Weatherstrip
GM: 1955–On #4744
Unit Pkg. 50 Ft.
#10064 Phosphate
Flexible filler for cloth covered windlace on door and windshield pillars and door bottoms. #4654 #4655 #4656
14 38 12
⁄ ″ Diameter ⁄ ″ Diameter ⁄ ″ Diameter
#16391 Unit Pkg. 15 Ft.
Unit Pkg. 50 Ft. (One Size) #6 Screw Size Panel Range: .025″ – .125″ Center of Hole to Edge: 3⁄ 8″ Unit Pkg. 50
Door Flange Weatherstrip
GM 1954-53 Universal #4731
Unit Pkg. 50 Ft.
#9880 Phosphate
(9424837; 381818-S2)
#10066 Phosphate
#8 Screw Size
Door Flange Weatherstrip
Ford 1955–On #4745
Unit Pkg. 50 Ft.
Panel Range: .025″ – .150″ Center of Hole to Edge: 3⁄ 8″ #10 Screw Size Panel Range: .025″ – .125″ Center of Hole to Edge: 13 ⁄ 32 ″ Unit Pkg. 25 GM, Ford Unit Pkg. 1000
#16392
Unit Pkg. 15 Ft.
#1898 Phosphate
#1899 Phosphate
#1903 Phosphate
#2099 Phosphate
#6–32 Machine Screw Size Unit Pkg. 100
#8–32 Machine Screw Size Unit Pkg. 100
14
⁄ ″–20 Machine Screw Size Unit Pkg. 100
18
⁄ ″ Stud Size
Unit Pkg. 100
5
Auto & Marine
#16390
#16395
AUVECO
Straight Prongs – Round Base (Material: Low Carbon Steel, Plain Finish)
This Teenut is recommended for thick material applications and applications requiring the top of the barrel to provide a bearing surface for mating parts.
4 Prong Type Auveco No. 11328 11331 11332 Thread Size 6–32 10–32 1 ⁄ 4 –20 A
9 16
3 Prong Type Unit Pkg. 50 50 50
B
C .164/.157 .232/.227 .311/.306
D
Type 3 Prongs 3 Prongs 4 Prongs
S .020 .035 .050
⁄
⁄ 3⁄ 4
34
⁄ ⁄ 5 ⁄ 16
7 64 9 32
⁄ ⁄ 15 ⁄ 64
18 13 64
Auto & Marine
Claw Prongs – Round Base (Material: Low Carbon Steel, Plain Finish)
This Long Prong Teenut has six claw-like prongs that penetrate into wood, toe in, and grip so tightly that you have to drive it to back it out of its hole.
Auveco No. 11322 10729 10730 10731 10732 Thread Size 8–32 10–24 1 ⁄ 4 –20 5 ⁄ 16 -18 3 ⁄ 8 -16 A B C .213/.208 .232/.227 .294/.289 .369/.364 .448/.443 D
3 16
S .035 .035 .042 .052 .062
Unit Pkg. 50 50 50 50 25
⁄ ⁄ 3⁄ 4 7⁄ 8
34 34
1.0
⁄ ⁄ 7 ⁄ 16 3⁄ 8 7 ⁄ 16
14 9 32
⁄
⁄ 15 ⁄ 64 19 ⁄ 64 11 ⁄ 32
13 64
TRIMMING SUNDRIES AND FASTENERS
(Illustrations Actual Size)
#807
General Purpose: Chrysler Unit Pkg: 100
#2309
Door Trim Panel Fastener: All cars with .125 Panels. Ford. Unit Pkg: 100
(Ford: 358470; Chrysler: 1900654)
Door Trim Panel Fastener: Ford and Chrysler Unit Pkg: 100
#9361
#808
General Purpose: Chrysler Unit Pkg: 100
#2310
Door Trim Panel Fastener: Chrysler Unit Pkg: 100
(383033-S101) Door Trim Panel Fastener: Ford Unit Pkg: 100
#10780
# 1720
Door and Quarter Trim Panel Fastener: Chrysler Unit Pkg: 100
#2385
Door Trim Panel Fastener: Chrysler Unit Pkg: 100
# 8206
Door Trim Panel Fastener: Ford Unit Pkg: 100
6
AUVECO
TRIMMING SUNDRIES AND FASTENERS
(Illustrations Actual Size)
Brown Japan General Purpose Head Diameter: 17 ⁄ 32 ″ Prong Length: 3⁄ 4″ Prong Width: 7 ⁄ 16 ″ Unit Package: 100
# 2288
Door and Window Crank Handle Retaining Clip GM, Ford & Toyota Unit Package: 100
(387477-S) White Nylon Interior Trim Panel Ford 1977-On Unit Package: 50
# 11797
(387182-S) White Nylon Seat Back Panel Retainer Ford 1977-On Unit Package: 25
# 11671
(2064891, 9818648, 9883583) White Nylon Door Trim Panel & Headliner Retainer, GM 1971-On Unit Package: 50
# 10621
(Chry: 6003349; GM: 9685057; AMC: 4005470; VW: N98905101) White Nylon Door Trim Panel Retainer Chrysler, GM, AMC, VW 1976-On Unit Package: 25
# 11678
9
Auto & Marine
Unit Package: 100
AUVECO
(GM: 1605396; Chry: 6030441; Ford: 388577S) Black Nylon Radiator Yoke, Fender & Bumper Shield Retainer GM, Ford and Chrysler Unit Pkg: 25
# 11146
(AMC: 4005099; GM: 796255; Chry: 6033862) Black Nylon Door Panel Retainer American Motors 1976-On GM 1988-81 Jeep Wrangler 1991-On Unit Pkg: 25
# 11349
(4005250) White Nylon
# 11350
Auto & Marine
Door Panel Retainer American Motors 1976-On Unit Pkg: 25
(Ford: 385661-S; Chry: 6003349, 6032363; VW: N989022) Black Nylon Door Trim Panel Retainer Ford, Chrysler & VW 1975-On Unit Pkg: 25
# 11351
(387496-S) White Nylon
# 11672
(GM: 2048248; Chry: 6003423) Natural Nylon Interior Trim Panel Retainer GM & Chrysler 1977-On Unit Pkg: 50
# 11673
Trim Panel Retainer Ford 1976-On Unit Pkg: 25
(GM: 25514221; Chry: 6003587) Natural Nylon Roof Headliner Retainer GM & Chrysler 1982-On Unit Pkg: 50
# 11675
(9883583) White Nylon
# 11774
(3065575) White Nylon
# 11796
Door Trim Panel Retainer GM 1971-On Unit Pkg: 50
Door Trim Panel Retainer GM 1978-On Unit Pkg: 50
(N801925-S) Black Nylon
# 12565
(20319841) Black Nylon Seat Back Retainer GM Camaro & Firebird 1982-On Unit Pkg: 25
# 12731
(14027471) Black Nylon
# 12759
Door Trim Panel Retainer Ford 1981-On Unit Pkg: 25
Trim Panel Retainer GM Trucks 1981-On Unit Pkg: 25
10
AUVECO
Phillips Oval Head Tapping Screws
Size 4 x 1⁄ 2″ 4 x 3⁄ 4″ 4 x 1″ 6 x 1⁄ 2″ 6 x 5⁄ 8″ 6 x 3⁄ 4″ 6 x 1″ 8 x 5⁄ 8″ 8 x 5⁄ 8″ 8 x 3⁄ 4″ 8 x 3⁄ 4″ 8 x 1″ 8 x 1″ 8 x 11 ⁄ 4 ″ 8 x 11 ⁄ 4 ″ 8 x 11 ⁄ 2 ″ 8 x 11 ⁄ 2 ″ 8 x 2″ 10 x 3 ⁄ 4 ″ 10 x 3 ⁄ 4 ″ 10 x 7 ⁄ 8 ″ 10 x 1″ 10 x 1″ 10 x 11 ⁄ 2 ″ Zinc Chrome Bk.Oxide Part No. Part No. Part No. 3063 3068 12894 3069 12896 3065 3070 12897 2698 1793 2700 1794 12796 2702 1796 12797 1421 2709 1799 2359 2710 10165 1483 2360 2713 10167 1423 2361 2716 2717 1932 2362 2718 2633 1717 2728 5606 2730 2731 2585 Unit Pkg. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Phillips Oval Head Sems® Countersunk Washer Tapping Screws
Size 6 x 5⁄ 8″ 6 x 3⁄ 4″ 6 x 1″ 8 x 5⁄ 8″ 8 x 3⁄ 4″ 8 x 1″ 8 x 11 ⁄ 4 ″ 10 x 5 ⁄ 8 ″ 10 x 3 ⁄ 4 ″ 10 x 1″ 10 x 11 ⁄ 4 ″ Chrome Part No. 3537 3538 3539 2771 2751 2772 2773 3465 3466 3467 3468 Unit Pkg. 100 100 100 100 100 100 100 100 100 100 100 Bk.Phos. Unit Part No. Pkg.
4 Hd
6 Hd 6Hd 6Hd 6Hd 6Hd 8Hd 6Hd 8Hd
6 Hd 6 Hd 6 Hd 6 Hd 8 Hd 8 HD 8 Hd 8 Hd
11787 11788 11789 11790 11791
100 100 100 100
Phillips Oval Head Sems® Flush Washer Tapping Screws
Size 8 x 5⁄ 8″ 8 x 7⁄ 8″ 8 x 1″ 8 x 11 ⁄ 4 ″ 6 Hd 6 Hd 6 Hd 6 Hd Chrome Bk.Phos. Part No. Part No. 2774 10652 2775 12957 10654 Unit Pkg. 100 100 100 100
Pop On Screw Covers & Bases
They’re simple to use: 1. Place washer over pilot or starting hole for screw, nail or rivet. 2. Install fastener. 3. Place Snap Cap over washer at slight angle. 4. Simply push Snap Cap down firmly.
Covers
AUVECO Part No. 13835 13836 15219 Screw Size #8 #8 #8 Color Black White Chrome O.D. 5⁄ 8″ 5⁄ 8″ 5⁄ 8″ Unit Pkg. 50 50 25
Countersunk Type
Part Screw No. Size 602 #6 604 #8 16015 #10 I.D. 5 ⁄ 32 ″ 13 ⁄ 64 ″ 1⁄ 4″ O.D. 1⁄ 2″ 5⁄ 8″ 11 ⁄ 16 ″ Unit Pkg. 100 100 100 Part No. 7624 7625 Unit Pkg. 1000 1000
Bases
AUVECO Part No. 13841 Screw Size #8 Use with Cover 13835,13838,15219 Unit Pkg. 50
11
Auto & Marine
BINDING
Seamless Binding
Extruded Vinyl Leather Grain 11⁄ 4″ x .030 thick 100 yards per roll
Auto & Marine
100% Sunbrella Acrylic Binding
“Herringbone”
11 ⁄ 4″ Cotton Carpet Binding Black, Brown, Beige, Grey 72 yards per roll
• • •
34
⁄ ″ Double Fold or 1″ double fold
Veltron Binding
11⁄ 4″ wide, 100% polyester carpet binding tape 72 yards per roll
100 yards per roll Available in all Sunbrella colors
Binding
• 11⁄ 4″ Single Fold Bison and Repp
Grain Vinyl, Stayfast Cloth • 100 yards per roll
Tonneau Binding
11⁄ 4″ Single Fold binding to match current tonneau vinyl 25 yards per roll
• Available in assorted
colors
• 3⁄ 4″ Double Fold Bison and
Repp Grain Vinyl, Stayfast Cloth • 50 yards per roll
Braided Acrylic Binding
3 16 ″
⁄
wide
Soft finish, perfect for awnings and umbrellas 100 yards per roll
Felt Binding
1″ wide Soft and pliable, great for dash covers, front end car masks, etc. 50 yards per roll
12
CANVAS, CLOTH BINDING
46″ Sunbrella — Regular Colors
4600 4601 4604 4605 4606 4607 4608 4610 4611 4613 4614 4616 4617 4618 4620 4621 4622 4623 4624 4626 4627 4628 4629 4630 4633 Erin Green Pacific Blue Natural Hemlock Tweed Dubonnet Tweed Charcoal Tweed Jet Black Turquoise Seaspray Brown Tan Mocha Royal Blue Walnut Brown Beige True Brown Terra Cotta Aquamarine Sky Blue Navy Salmon Toast Vanilla Cadet Grey Linen 4635 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4650 4651 4652 4653 4654 4655 4656 4657 4658 4667 4668 Buttercup Forest Green Coral Mauve Black Cherry Sapphire Oyster Persian Green Charcoal Grey Seagrass Green Captain Navy Persian Tweed Taupe Teal Tweed Silver Medit. Blue Medit. Tweed Linen Tweed Alpine Spruce Periwinkle Brass Mahogany Aspen 6001 6004 6005 6006 6007 6008 6010 6017 6021 6023 6026 6030 6033
60″ Regular Colors
Pacific Blue Natural Hemlock Tweed Dubonnet Tweed Charcoal Tweed Jet Black Turquoise Royal Blue True Brown Aquamarine Navy Cadet Grey Linen 6037 6042 6043 6046 6047 6048 6050 6051 6052 6053 6054 6055 6056 Forest Green Oyster Persian Green Captain Navy Persian Tweed Taupe Teal Tweed Silver Medit. Blue Medit. Tweed Linen Tweed Alpine Spruce
60″ Colors
6003 Jockey Red 6031 Burgundy 6049 Plum 6065 Concord 6066 Logo Red
VALMEX® NAUTICA
Nautica Mainstream Style number 4227/5842
2 side coated, lacquered and embossed (artificial leather), polyester base cloth, 59″ wide, designed for marine applications and meets the highest possible quality standards • Fungicide finish • Resistance against sea water and bird droppings • High UV and weather resistance • Absolutely water tight • Lightweight and needs little storage room • Long product life • Easy care • Limited 5 year warranty Available in 8 colors: Blue, Grey, Navy/Grey, Snow White, Tan, White, Silver, Ivory
46″ Premium Colors
4602 4603 4609 4631 Sunflower Yellow Jockey Red Orange Burgundy 4649 Plum 4665 Concord 4666 Logo Red
Sunbrella Outdoor & Marine Furniture Fabrics
See Sample Book for specific patterns.
Other Sunbrella Fabrics available special order: Firesist, Stripe Umbrella, Furniture Sunbrella
13
Auto & Marine
100% Solution Dyed Acrylic Woven Awning and Marine Fabric 9.25 ounces per square yard Solution dyed to give excellent fade and weather resistance
Sunbrella face, vinyl back Exterior grade Waterproof 60″ wide
• Marine polyester • 5 year limited warranty • 62″ wide
All over the world, Top Gun outlasts the competition. Day after day, year after year in the sun—it survives like a champ through seasons of wind, rain and snow, in 16 beautiful colors. The specially formulated coating will not harden, crack or peel.
Finally, an exterior grade marine fabric for all your trimming needs. Whether it’s marine, automotive, or other exterior applications, if it has to be waterproof…it has to be Seamark.
Colors Available:
8401 8403 8404 8406 8408 8417 8423 8430 8431 8433 8437 8442 8443 8446 8451 Pacific Blue Jockey Red Natural Dubonnet Tweed Jet Black Royal Blue Aquamarine Cadet Grey Burgundy Linen Forest Green Oyster Persian Green Captain Navy Silver
Colors Available:
Aquamarine Black Cadet Grey Captain Navy Charcoal Tweed Dubonnet Tweed Forest Green Jockey Red Linen Tweed Mediterranean Blue Navy Oyster Pacific Blue Royal Blue Tweed Sapphire Blue Tweed Taupe Tweed Teal Tweed True Burgundy Turquoise 458 462 463 465 466 467 468 469 470 471 472 474 476 477 478 479
Colors Available:
Charcoal Aquamarine Caribbean Blue Hemp Beige Turquoise Sea Gull Gray Arctic White Chocolate Brown Buckskin Tan Onyx Black Indian Birch Navy Blue Burgundy Sunset Red Teal Forest Green
Impregnation coated, 100% woven polyester suitable for many indoor and outdoor applications. This fabric features high strength, dimensional stability, abrasion, mildew, and ultraviolet resistance. Produced with a clear seal coat to provide a high degree of water resistance for such uses as boat covers, canopies, and various other types of outdoor protective covers.
Colors Available:
449C 480C 483C 484C 487C Black Royal Red Aquamarine White 488C 489C 490C 491C 492C Forest Green Silver Grey Teal Brown Charcoal 493C 494C 496C 497C 498C 499C Lakeside Blue Caribbean Blue Burgundy Turquoise Harbor Blue Birch
14
CANVAS, CLOTH
CANVAS MARINE DUCK
10 oz. Poly/Cotton Blend Water and Mildew Resistant 100 Yards per roll Available in Gray 62″ Wide
1000D CORDURA NYLON PACK CLOTH
60″ Wide 50 Yards per roll Black Burgundy Camouflage Woodland Charcoal Navy Orange Purple Red Royal Silver Spruce Teal
210D, 420D, 600D also available—special order, minimums may apply
NATURAL COTTON DUCK
Available in a variety of weights and widths. Please inquire.
SUNFORGER
36″ Wide 10.5 oz. Mildew and Water Resistance Boat Shrunk Pearl Grey
15
Auto & Marine
CANVAS, VINYL
Vinyl Laminated Fabrics for Industry, Military, Marine, Recreation and Health Care
Incredible Strength
Herculite fabrics exhibit exceptional tear resistance. Punctures will not spread into running rips. The fabrics offer extended service life, long term cost savings and more durable protection under even the most rugged working conditions. Easy to Handle Lightweight Herculite fabrics are easy to install and remove. Despite their great strength they cut and fabricate easily and simply. Unique strength/ weight/bulk ratios allow for ease of problem solving and reduction opportunities in engineering and product design. Chemical resistance Herculite fabrics provide excellent resistance to most common industrial chemicals and oils. Mildew will not weaken the fabric nor will they rot. In most cases, stains can simply be wiped clean. Impermeability Herculite fabrics are completely waterproof. Their hydrostatic resistance progresses proportionately to the weight of the particular fabric. Herculite fabrics also provide excellent protection against gasses, dust and mud. Easy to Maintain To keep Herculite fabrics looking fresh and new, in most cases just wipe clean with a solution of soap and warm water.
Auto & Marine
Abrasion Resistance
Herculite fabrics can sustain vigorous chafing action many times greater than conventional materials. They are exceptionally durable, resist wear, stress and punctures.
Self-Extinguishing
Herculite fabrics are all inherently flame retardant, not just surface treated, and will self-extinguish the instant the source of flame is removed. Registrations and approvals for Herculite fabrics include the California State Fire Marshal, the New York City Board of Standards and Appeals, the National Fire Prevention Association, the Federal Department of Transportation–Motor Vehicle Standard of Interior Materials, and most fire rating states. Herculite materials are tested in accordance with Method 5903, Federal Standard No. 191 Textile Test Methods.
All Weather
Herculite fabrics are ultraviolet resistant (except for translucent styles). They retain their original physical properties to a remarkable degree while exposed to sun, wind, rain and other natural forces. The fabric resists both cracking at temperatures as low as -35° Fahrenheit and plasticizer extraction and UV degradation at temperatures in excess of +100° Fahrenheit.
Black Fawn Green Gray Black Green Red Royal Blue Black Gray Green Navy Blue Olive Drab Gray Green Navy Blue Black Forest Green Med. Green Ocean Blue Orange Red Black Ivory Ivory/Gray Nautical Blue White Black Pearl Grey Translucent
Red Royal Blue White Yellow Tan White Yellow Red Royal Blue White Yellow Red White Yellow Royal Blue Shamrock Tan White Yellow Tawny White White/Blue White/Gray
18 oz.
72″
25
57#
10.5 oz.
62″
100
115#
18.5 oz.
50″
50
85#
10.5 oz.
54″
100
100#
14 oz.
61″
75
111#
12 oz.
62″
45
65#
9.5 oz. 10.3 oz. 12.1 oz. 18 oz.
54″ 54″ 82″ 62″
100 50 50 50
94# 48# 94# 100#
K-TEX
18.5 oz. PVC Vinyl Coated Polyester 100 yards per roll • 61″ wide • UV treated KTX80 Black KTX13 Light Blue KTX10 Blue (Royal) KTX30 Red KTX38 Burgundy KTX35 Tan KTX40 Green KTX00 White KTX85 Grey KTX60 Yellow
17
Auto & Marine
YARDS PER ROLL
WEIGHT PER ROLL
CARPET
DORSETT
The Performance Mill
Auto & Marine
AUTOMOTIVE REPLACEMENT CARPET
SAMPLE CARDS ON REQUEST
18
• Bayshore 6400 Series Cut Pile Marine Carpet, 100%
19
Auto & Marine
• Dynamic 300 Series Loop, 100% Polypropylene, 40″ wide • Volkswagon 400 Series Loop, 100% Polypropylene,
CARPET
AUTO CARPET SYSTEMS MOLDED CARPETS OEM FIT & DESIGN
Auto & Marine
● ● ● ● ● ● ● ● ●
Available in 500, 600, 800 Series Dorsett Carpet Molded to OEM fit Dielectrically sealed heel pads Over 100 colors available All carpets include heavy 40 oz. felt padding Guaranteed shipping in 48 hours Heat molded Easy installation Quality that meets or exceeds OEM specifications
Cut & Sewn Carpets
● ● ● ●
All carpets available in 600 and 800 Series Dorsett Carpet Imports available in original materials Serged and bound edges as original All carpets have heel pads as original Molded Rubber Mats
● ● ● ●
OEM half floor mats Available in black only Felt padding available at minimal additional cost Available for most makes and models of trucks Molded Vinyl Mats
● ● ●
11.5 oz. black lava finish vinyl Durable and washable Heat molded for easy installation
(None of the above are stocked in Keyston Bros. warehouses. F.O.B. Dalton, GA.)
20
CARPET
AQUA-TURF MARINE CARPET
Available in 20 colors in 6′ width Available in 10 colors in 8′ width
CLASSIC MARINE CARPET
36 oz. Plush Pile, 8′ wide 100% Polypropylene Available in 5 colors
Routine carpet cleaning with a common household detergent solution will keep your carpeting looking its best. Stains should be removed as quickly as possible. To clean, use household detergent dissolved in warm water. Make a paste and thoroughly soak the carpeting. Let the soap solution remain on the surface for approximately 5 minutes; then take a broom or bristle brush and gently work the solution into the carpet surface. Rinse thoroughly with cold water.
• • • • • • • • • •
100% Olefin pile Low water retention Superior surface coverage Moisture and mildew resistant Clearer more luxurious colors UV light stabilized Soft textures No fuzzing or pilling of face fiber Color coordinated to marine vinyls Performs well in all climates
VINYL MARINE FLOORING
72″ wide, 25 yards per roll Available in 6 colors
RUBBER MATTING
Description MAT 1488 Nibbed MAT 1576 Basket Weave MAT1703 Ribbed MAT 2100 Textured Width 72″ 54″ 36″ 36″ Yds/Roll 16 2⁄ 3 25 25 25
21
Auto & Marine
CARPET
HEEL PADS
Original Equipment Type
Small Medium Large Custom 61⁄ 4″ x 13″ 91⁄ 4″ x 171⁄ 2″ 13″ x 17″ 91⁄ 2″ x 127⁄ 8″
NON-WOVEN/ NEEDLE PUNCH AUTOMOTIVE CARPET
Automotive Carpet features a carpet construction that:
Auto & Marine
Colors to match most Carpet Colors.
• Is made of 100% solution-dyed • • • • • • • • • •
polyolefin fiber Easy to cut, mold and fit Resists static build-up Resists sunfading Will not unravel Resists stains and soiling Resists mildew Has color continuity No binding needed Latex and unlatex backing 40″ and 80″ roll widths
TRUNK LINING
Non-Woven, Needle Punch, Uncoated
Description Black Charcoal Light Gray Dark Gray Width 54″ 54″ 54″ 54″
AUTO CARPET PADDING
20N 27N 40N 36″ 36″ 36″ 20 oz. per sq.yd. 27 oz. per sq.yd. 40 oz. per sq.yd. Felt Felt Felt Carpet Padding Carpet Padding Carpet Padding 50 yard rolls 50 yard rolls 25 yard rolls
22
CARPET CHALK
PHOTOMARK PENCIL
TOL13201
White writing core ideal for writing on plastic, photos, film, X-ray plates, glass or other slick surfaces. Marks are removable with a damp cloth. PMA Certified Non-Toxic. Made in USA. TOL5170–White TOL5165–Black TOL5175–Yellow
• Perfect for marking on glass, plastic, film,
paper, metal, rubber, or any smooth surface
MARKING CHALK
• Paper wrapped with pull string • Packed one dozen per box • PMA Certified Non-Toxic
HYGIEIA DUSTLESS CHALK
TOL88
Contains 12 chalks: 8 white, 2 yellow, 1 red, 1 blue Our chalk is clay based and thus is much easier to erase. Other chalks that are not clay based will leave a grease mark on cottons and other fabrics. The Osborne No. 88 Chalk also works on glass or vinyl that other chalks do not. Due to the shape of this chalk a sharp marking edge is maintained.
COLOR White Yellow
TOL31144 TOL31344Y
White Yellow
1 dozen sticks per box 12 boxes per 1 gross pack
23
Auto & Marine
CLEANERS, CONDITIONERS, PROTECTANTS
Lexol’s unique formula penetrates easily into wet or dry leather to bond with the leather fibers. Unlike “all-purpose” products, Lexol will not leave your leather surfaces slick or slippery. And it leaves no greasy residue to stain or discolor clothing. Remember, it’s important to use Lexol Leather Conditioner regularly to make sure your seats are properly conditioned. Between cleanings a quick refresher of conditioner will keep your leather upholstery in top condition. For decades, Lexol has been trusted by automobile restorers to preserve the fine leather interiors in classic and antique automobiles. Do what these experts do — preserve your leather investment with Lexol. You can help prevent your leather seats from cracking by cleaning them with Lexol-pH Leather Cleaner and feeding them with Lexol Leather Conditioner. Each product has been designed specifically for use on fine leather. If your leather seats become soiled, we recommend that you clean them first with Lexol-pH. Lexol-ph deep cleans and foams away dirt and oil that build up on leather interiors. You can trust Lexol-pH because it is adjusted to the pH range of leather itself. And Lexol-pH rinses easily. CCCD12 CCCDSP CCCD200 CCCL12 CCCLSP CCCL200 Lexol Conditioner Lexol Conditioner Spray Lexol Conditioner Lexol pH Cleaner Lexol pH Cleaner Spray Lexol pH Cleaner 16.9 oz. 16.9 oz. 200 ml. 16.9 oz. 16.9 oz. 200ml. 12 per case 12 per case 30 per case 12 per case 12 per case 36 per case
Auto & Marine
VINYLEX®
The New Protectant for all Vinyl, Rubber and Plastics
For more than 50 years Lexol has made the finest products to clean and condition leather. Now they introduce Vinylex Protectant, a new formula designed to renew vinyl, rubber and plastic. New Vinylex Protectant with its DH-60 UV sunscreen protects against fading, cracking and drying caused by age, environmental pollution and the sun’s ultraviolet rays. Vinylex cleans, conditions, protects and renews vinyl, rubber and plastic without leaving an excessively “greasy” look. Trust your car interiors, vinyl tops, bumpers and tires, as well as luggage, furniture and patent leather articles to Vinylex Protectant.
#CCDH60
16.9 oz. – 12 per case
24
CLEANERS, CONDITIONERS, PROTECTANTS
Leather & Plastic Cleaner
Malco Leather & Plastic Cleaner is the classic solution to soiled vinyl and leather. This special formula of high-performance cleaners restores the “like new” look to leather and plastics. Ground-in soils, grease, grime and dirt are easy to remove; just spray and wipe. Great-looking dashes, kick panels and vinyl and leather upholstery are easy to obtain with Malco Leather & Plastic Cleaner. Because Malco Leather & Plastic Cleaner can clean so many different, non-porous materials, there are thousands of other applications and uses. Marinas, restaurants, public transportation maintenance facilities, motels, equipment rental suppliers and car dealers have hundreds of opportunities to benefit by this powerful cleaner. #CC100B #CC100G #CC100G5 22 oz. sprayer containers 1 gal. containers 5 gal. containers 12 per case 4 per case
Spray Upholstery Fabric Carpet Cleaner
How it works: Malco Spray Upholstery Fabric Carpet Cleaner is ready to use. Just spray directly on surface to be cleaned (test corner of fabric for color permanence), then scrub with wet brush or sponge. Wipe area with a dry cloth to remove soil and allow to dry. It will not leave a buildup on fabric and will not leave an oily residue to cause resoiling. It is a safe and excellent cleaner for most fabrics and upholstered furniture. What it does: When used according to directions, Malco Spray Upholstery Fabric Carpet Cleaner will safely clean all types of fabrics and upholstered furniture. It contains no solvents to affect coloring and no alkalis to damage fabric. Malco Spray Upholstery Fabric Carpet Cleaner is perfumed to leave a pleasant odor, and is safe and easy to use.
#CC1017 #CC1017G 20 oz. Bottle with trigger sprayer Concentrate gallon 12 per case 4 per case
Car Freshener & Deodorizer
How it works: Malco Car Freshener & Deodorizer is a blend of perfume and deodorizers designed to eliminate stale odors at their source, preventing them from recurring. It contains no harmful solvents or petroleum distillates. No dilution required. Malco Car Freshener & Deodorizer is ready to use. For best results, apply to carpet with spray bottle. What it does: Malco Car Freshener & Deodorizer leaves cars springtime fresh with a new car scent. Ideal for freshening up used cars while removing stale odors. Eliminates mustiness in hot weather. Recommended for use by car washes to remove damp odors while leaving customers’ cars springtime fresh. #CC104216 20 oz. bottle with trigger sprayer 1 gallon plastic bottles 12 per case 6 per case
25
Auto & Marine
CLEANERS, CONDITIONERS, PROTECTANTS
Auto & Marine
PB-2
Protects & Beautifies How it works: Malco PB-2 forms a binding surface coating that protects against the sun’s harmful effects that cause dryness, cracking, discoloration and deterioration of rubber, vinyl, plastic and wood surfaces. On porous surfaces Malco PB-2 penetrates and seals the surface to give the best protection possible. It beautifies and restores luster, eliminating frequent cleanings by its resistance to dirt, oil, grease and oxidation. Malco PB-2 contains no harmful or corrosive chemicals. What it does: Malco PB-2 protects and beautifies vinyl, plastic, leather, rubber and wood. Apply Malco PB-2 to air conditioning, heater hoses or any rubber surface to prevent dry rot. Ideal for cleaning plexiglass and other plastic surfaces. It contains no abrasive ingredients and therefore will not scratch or mar plastic surfaces. Excellent for tires, floormats, dashboards, seats, automotive vinyl tops and household surfaces. It protects plastic, vinyl and leather while it renews their beauty.
#CCPB2 #CCPB2G 16 oz. containers with sprayers, 24 per case 1 gallon containers with 16 oz.applicator bottles, 6 per case
Red Thunder
Malco Red Thunder is a versatile, concentrated cleaner and degreaser. Heavy accumulations of grease and dirt cannot block the powerful cleaning action of this biodegradable cleaner. Besides tackling the big jobs, Malco Red Thunder can be diluted to suit the requirements of less demanding tasks. Malco Red Thunder is non-caustic, requiring no special disposal procedures, and will not harm aluminum. #CC102301G 1 gallon containers 4 gal. per case
Foaming Carpet & Upholstery Cleaner
Convenient aerosol package makes cleaning carpet and upholstery — even velour — fast and easy. #CC101720 20 oz. aerosol can 12 per case
26
CLEANERS, CONDITIONERS, PROTECTANTS
FABRIC PROTECTOR
SPR980
Protects fabric from stains, dirt, grease, water. Effective on both water and oil-based stains and soils. 13.5 oz. 12 per case
VINYL & LEATHER CLEANER
(with Oil of Mink)
Cleans vinyl, naugahyde, etc., of stains, smudges, fingerprints, general soil and dirt. Easy to use. Just spray on, let stand for a couple of minutes and wipe off. 15 oz. 12 per case
GLASS CLEANER
CC50
Cleans in seconds. Leaves no film. Non-caustic, non-flammable, non-ammonia formula. Dries fast. Excellent for cleaning plastic, glazing, tile, chrome, stainless steel, enamel, porcelain. 19 oz. 12 per case
FOAMING RUG & UPHOLSTERY CLEANER
CC869
Spray an even layer of foam, work into fabric with sponge or sponge mop — let dry and vacuum. Perfect for spot cleaning. 18 oz. 12 per case
KEYSTON VINYL CLEANER
CC4220
Cleans and preps surfaces for CC4222. 16 oz. pump bottle 12 per case
KEYSTON VINYL PROTECTANT
CC4222
Won’t wash off or crack material — contains silicone. 16 oz. pump bottle 12 per case
27
Auto & Marine
CC990
CLEANERS, CONDITIONERS, PROTECTANTS
#303 AEROSPACE PROTECTANT #303 HIGH TECH FABRIC GUARD
• Proven best: Water
repellency, stain resistance, UV screening
Auto & Marine
• The only protectant that
provides effective UV screening. 303 is like “SPF 40 for your stuff!”
• The most profitable brand
in the category
• Best Value: Due to superior
performance, coverage and durability
• Product performance
generates repeat sales
• Recommended by and for
• Originally developed for
aerospace and aviation, 303 is the most manufacturer-recommended surface treatment in the world. 15.2 oz. 12 per case 15.2 oz. 12 per case
CC54027Q CC54028G
Quarts (spray bottle) 12 per case Gallon 6 per case
Aqua-Tite, containing silicone, is a premium grade water repellent solution. It restores the water repellency of cotton and synthetic fabrics. It can be used on flame resistant fabrics without affecting the flame resistant properties. Its neutral color is suitable for use on all colors; however, it may impart a slightly darker, richer tone to some lighter colored fabrics. For use on fabrics of acrylic, cotton, nylon, polyester, poly/cotton blends; also garments made of these fabrics, sporting goods equipment, tents, awnings, boat covers, leather and canvas fabrics. One gallon properly covers a minimum of 200 square feet, depending on the absorbency of the fabric. Can be sprayed, brushed or rolled.
28
CLEAR PLASTIC
CLEAR DOUBLE POLISHED WINDOW VINYL
If you’re tired of yellowed, scratched boat curtains, then you need to read this.
Due to recent developments in polyment chemistry, a weather-resistant, scratch-resistant enclosure is now available. Strataglass™ is a premium, flexible vinyl sheet engineered to resist the damaging effects from both the sun’s rays and scratching from handling. The difference between rigid PVC—such as plastic pipe—and flexible PVC—such as boat curtains—is a chemical called plasticizer. The more plasticizer that is mixed in during manufacturing, the more flexible the vinyl is. Over time, however, this plasticizer migrates to the surface and, from there, gets washed or wiped away; and this process is accelerated by the sun. Little by little, flexible PVC becomes rigid PVC. The side effects of this change include yellowing, clouding and becoming brittle. Eventually, you can no longer see clearly through the curtain. Unless, of course, your curtains are made of Strataglass. This revolutionary product contains a polymeric coating that seals the plasticizer in, keeping the curtain clear and flexible—even when exposed to temperatures as low as -10° F. Isn’t it time to replace your yellowed, scratched, cloudy vinyl boat curtains with the only ones that will stay clear? PWST4054111 PWST3054111 .040 GA .030 GA 54″ x 111″ 54″ x 111″
29
Auto & Marine
54″ wide Available plain or with paper Roll sizes vary Available gauges: .012, .016, .020, .030, .040 .020 and .030 also available in smoke tint
CLEAR PLASTIC
Auto & Marine
Quality Press Polished Windows
Consistency & Reliability
Each production run of SEA-FLEX press polished vinyl sheets meets rigid quality inspections to assure consistance and reliability.
Flexibility & Durability
SEA-FLEX press polished sheets are sewable, RF weldable and solvent bondable, store easily and clean with soap and water.
Optimum Clarity & OV Resistance
.020, .030, .040 gauge press polished sheets with UV stabilizers enhance prolonged clarity. Gauge .020 .020 .030 .040 .040 .040 .040 Size 29″ x 68″ 50″ x 100″ 50″ x 100″ 50″ x 100″ 27″ x 62″ 24″ x 54″ 29″ x 68″ Color Clear Clear Clear Clear & Smoke Clear & Smoke Clear Clear
For flexible windows for marine enclosures, Ultrashield is clearly the best choice. Our Ultrashield plastic sheet is manufactured with a finish so tough it resists scratching, locks in chemicals, and keeps out harmful environmental contaminants and the damaging effects of exposure to the sun.
30
Sizes Available .030 GA. .040 GA. .040 GA. 54″ x 110″ 54″ x 110″ 54″ x 110″ Clear Clear Smoke
CONVERTIBLE TOPS
Innovation is part of our Heritage: Robbins has been granted a number of patents for our innovative designs, such as our Rainguard deck seam for 1980-93 VW convertibles; and our Flex-Hinge extrusion for folding glass rear windows. In 1994 Robbins developed the first tops with glass window for 1990-97 Miata convertibles, in order to offer Miata owners a top that is far superior to tops with plastic windows. Testing and Quality Systems: For each lot of topping we received Robbins performs stretch testing, sew testing and heatseal testing. We test all lots of thread, plastic sheets and other critical raw materials before they can be used to manufacture our products. We passed the tough Ford Q1 Quality Audit and are currently working to obtain ISO 9000 quality system certification. Robbins is committed to continuous improvement of our processes, products and level of service. Since 1943: Three generations of the Robbins family have operated Robbins Auto Top Co. Our experience in the design and manufacturing of convertible tops, glass and plastic windows, tonneau covers and related products, is unmatched in the industry. American Convertibles
Chrysler-Dodge-Plymouth 1963–71 Chrysler Lebaron, Dodge Chrysler Sebring, Stratus Ford, Mercury, Thunderbird Mustang, Cougar 1964–73 Mustang 1983 – Current Mercury Capri Corvette General Motors 1955 – Current Cadillac Allante Camaro-Firebird Cavalier, Sunbird, Sunfire Geo Metro Nash Metropolitan
Foreign Convertibles
Alfa Romeo Audi Austin-Healey Austin-Healey Sprite BMW Clenet Cobra Ferrari Ford of Europe Escort Fiat Hillman Minx Honda, S-2000 Jaguar Jensen Karmann Ghia Lancia Lotus Elan Maserati Mazda MX-5 Miata 1990-97 Mazda MX-5 Miata 1999-On Mazda RX-7 Mercedes Benz Mitsubishi MG MGF (Rover) Morgan Morris Minor Nissan / Datsun Opel Kadett, Astra Peugeot Porsche Renault, Renault Alliance Rolls Royce Rover Saab Singer Sunbeam Suzuki Swift Toyota Triumph Volkswagen Volvo
Sport Utility Vehicles
Geo Tracker 1989 – Current Isuzu Amigo Suzuki Samurai, Santana, SJ413 1989-94 Suzuki Sidekick, Vitara 1995-On
31
Auto & Marine
CONVERTIBLE TOPS
E-Z ON
Based on its rapid expansion in the past decade, E-Z ON Auto Tops, Inc. has been recognized as the world’s fastest-growing manufacturer of replacement tops for both domestic and import cars. Since its founding in 1989, E-Z ON Auto Tops, Inc. has flourished through providing customers with the highest quality customer service as well as excellent fitting tops at very competitive prices. Dollar for dollar, E-Z ON’s convertible tops have proven to be the industry’s best value. In addition to the ongoing expansion of its own primary product line, E-Z ON has fueled growth through acquiring the resources of other respected firms. One recent example is bring aboard the SUVs and expanding their import car line to include Alfa Romeo, Austin Healy, Fiat, Jensen Healy, MG Series and Triumph Series tops, all developed by Amco, a 50plus year manufacturer of convertible tops. Now armed with precision patterns and state-of-the-art equipment, E-Z ON Auto Tops, Inc. enters the new millennium as the best source for virtually every application, domestic and import, car and SUV. Alfa Romeo AMC-Renault Audi Austin Healy BMW Buick Cadillac Capri Chevrolet Corvette Chrysler Datsun DeSoto Dodge Edsel Fiat Ford Ford Escort (Europe) Honda Jaguar Jensen Healy Karmann Ghia LaSalle Lincoln Lotus Mazda Mercedes Mercury Mitsubishi MG Nash Nissan Oldsmobile Packard Plymouth Pontiac Porsche Rambler Saab Studebaker Toyota Triumph Volkswagen Volvo Willys Jeepster
⁄ ″ wide x tacking strips ⁄ ″ wide x tacking strips
3 16
⁄ ″ thick 25 yd. roll ⁄ ″ thick 50 ft. roll
⁄ ″ wide x tacking strips
1 2
38
⁄ ″ thick 50 ft. roll
5 8
1 8
BLACK CONVERTIBLE TOP OEM WEBBING
Used on late model LeBarons, Mustangs, GM cars CTW5158 6″ wide 100 yards per roll
CTW0904BK 9″ wide 100 yards per roll
CONVERTIBLE TOP HEADLINERS
Ready-made, ready to install headliners. Available for all models originally produced with headliners.
CONVERTIBLE TOP PADS
Every new top deserves a set of new pads. Black.
33
CONVERTIBLE TOP CABLES
CONVERTIBLE TOP CABLES
Part #
CA122
Description
65-68 Ford Galaxie, Monterey, Park Lane 82-83 Chrysler LeBaron 84-86 Chrysler LeBaron 87-91 Chrysler LeBaron 85 Toyota Celica 86-89 Toyota Celica 66-67 GM A Body: Buick GranSport, Skylark; Chevelle; Malibu 92-94 Chrysler LeBaron 83-85 Cadillac 87-93 Cadillac Allante 91-93 Dodge Shadow 87-93 Saab 90-94 Mercury Capri. Upper side pair. Cars with 235 ⁄ 8 ″ seam 90-94 Mercury Capri. Upper side cables. Cars with 25″ seam 90-94 Mercury Capri. Lower (vertical) cables Opel Kadett 99 Mazda Miata 90-97 Mazda Miata 68-71 Ford Fairlane, Torino; Mercury Comet, Montego 96 and later Chrysler Sebring and Stratus 64-1/2-65 Ford Mustang 65-68 Ford Mustang 69-70 Ford Mustang 89-90 Ford Mustang 83-88 and 91-93 Ford Mustang Ford Mustang, late 90 and early 91 with 383⁄ 8″ overall 94-Feb.95 Ford Mustang March 95-96 Ford Mustang pair side hold down cables
Description
68-72 GM Midsize: Buick GranSport, Skylark, Special; Chevrolet 72-76 GM Full Size (“Scissor Tops”). This is the Universal version 65-70 GM “C” Body: Buick Electra; Cadillacs; Oldsmobile 98 65-70 GM “B” Body: Buick LeSabre, Wildcat; Chevrolet Impala 67-70 GM Camaro and Firebird 86-93 Corvette convertible pair hold down cables 68-75 Corvette convertible pair hold down cables 72-76 GM Full Size (“Scissor Tops”). This is the ORIGINAL version Early 71 Scissor Tops, Original configuration like CAG108 84-87 Sunbirds and Cavaliers pair side hold down cables 88-91 Sunbirds and Cavaliers pair side hold down cables 84-94 Sunbirds and Cavaliers. Rear flap cables. 92-94 Sunbird and Cavalier 95-97 Sunfire and Cavalier Geo and Metro. Original configuration 91-95 Oldsmobile Cutlass 91-95 Oldsmobile Cutlass rear cable 87-91 Camaro convertible pair hold down cables 94-96 Camaro convertible pair hold down cables 88 Jaguar rear attachment cable 72-89 Mercedes Benz convertible pair hold down cables Universal cables for foreign cars. All Fiats, Alfas, etc. Will fit VW
Code C D E F RTO RT1 RT2 RT3 RT4 BB1 BB3 WR0 WR01 WR02 WR WR1 QSP1 QSP ISP1 ISP
Remarks
(2) Rear top bows
Attached lamp block
(3) Rear base bows (4) Rear window rings
The later bows were originally three piece particleboard pieces. These rings replace the original wood, particleboard and later (mid ’75 up) plastic inserts. We also stock the rear window rubber gaskets and often have used glass and metal frames. These early pieces sold only with #7. See diagram. Includes separate pieces. #6.
(5) Quarter side pieces (6) Inner quarter side pieces (7) Main bow set
KARMANN GHIA (Special Order)
(1) Front bows (2) Rear top bows (3) Rear base bows up to mid ’69 mid ‘69 – ‘74 up to mid ‘69 mid ‘69 – ‘74 up to mid ’69 GE G KGRT1 KGRT2 KGBB1 The early ‘69 cars had plastic rear windows. Late ‘69s have glass windows. Not required in later cars.
36
CONVERTIBLE TOP MATERIALS
CAMBRIA
®
Your top choice for a distinctive roof treatment
Haartz is your top choice, too. Because only Haartz has the unique combining technology to produce a genuine fabric this elegant. And only Haartz backs up your choice with the proven technology, performance, and an appealing selection of colors to help your customers get just what they’re looking for. Cambria
• • • • •
adds value makes a personal statement enhances appearance provides superior fade-resistant quality cleans easily
Haartz Convertible Sport Topping
Standard Grain Vinyl Sailcloth Grain Vinyl Stayfast Acrylic Cloth Available in a variety of colors
Bow Drill
Black or Tan
37
Auto & Marine
DASH COVERS — COLOR COAT
Auto & Marine
DASH COVERS & REPLACEMENT DOOR PANELS
COLOR COAT
Spray coating for plastics, vinyl tops and upholstery
COLOR COAT is a solvent base, high hiding acrylic coating which will restore or change color on vinyl tops, vinyl upholstery, carpets, and both flexible and rigid plastic. It is not a dye, but a solid covering product which will easily cover a color completely. A black surface can be changed to white with only two or three coats. Adhesion to a clean surface is excellent. Extreme flexibility is maintained, with no tendency to crack or chip. COLOR COAT is durable, weather resistant, and will not soften with normal heat. It will coat all types of vinyl fabric and most plastic surfaces, both exterior and interior. Also available in 3 sheens of clear.
COLOR CARDS AVAILABLE UPON REQUEST
38
DUVETYNE, ELASTIC CORD
DUVETYNE
#DUV5407
7 oz. Black
COMMANDO CLOTH
10 oz. Black
Both are 54″ wide and FR-treated, and certificates are available.
ADJUSTABLE SHOCK CORD HOOKS
#ECP14H
With this plastic adjustible hook, the 3⁄ 16″, 1⁄ 4″, and 5⁄ 16″ shock cord can be adjusted to any desired length easily, in just seconds. It is ideal for automotive, marine and a variety of everyday uses. Durable, rustproof hooks will not mar finished or plated surfaces.
39
Auto & Marine
#CMD5410
ELASTIC CORD
MARINE GRADE POLYESTER COVERED SHOCK CORD
Available in the following sizes:
1
PLASTIC COATED CONE HOOK
Black nylon-coated coil-spring shock cord hooks
Auto & Marine
⁄ 8″, 3⁄ 16″, 1⁄ 4″, 5 ⁄ 16″, 3 ⁄ 8 ″
Fits 1 ⁄ 4″ shock cord SC14H
RUBBER ROPE TIE DOWNS
DIAMOND BRAID NYLON ROPE
1 4″ 3 16 ″
⁄
500 foot spool 600 foot spool
⁄
FLAT ELASTIC
3 8″
⁄ diameter black rubber rope
available put-ups: 200 feet 800 feet Hooks only 150 hooks no hooks Widths:
Black or White
1 2 ″, 3 4 ″,
MH200P5K MH800PSK MHPD2
⁄
⁄
1″, 11⁄ 2″, 4″
40
FASTENERS
BRAND DURABLE FASTENERS
Auto & Marine
When superior snap action and holding strength is needed, DURABLE is the fastener to use. Selfpiercing, so no pre-punching is required, the DURABLE fastener’s heavy-duty construction assures a firm grip that will remain secure through years of use. Standard finish – Nickel/Brass. CAPS SOCKETS EYELETS STUDS
11
⁄ 64″ Barrell
10128
10224
Normal Action
1
10412
⁄ 4″ Barrell
10370
Clinch Stud
10127
1
⁄ 4″ Barrell
5
⁄ 16″ Barrell
10413
10373
Flangeless
CARPET FASTENERS
10414
3
⁄ 8″ Barrell
10123
Ring
SCREW STUDS
10362 10222
Socket Clinch type socket is attached to the carpet by a prolonged ring, which won’t pull through the carpet when it is snapped off the stud. The ring and socket are finished in antique black. Fits on any Durable stud. #8-15 Self Tapping 3 ⁄ 8″ or 5⁄ 8″ Screw
An intermediate size snap fastener that provides firm snap action and strong holding power without being visually prominent on the end item. Standard finish – Nickel/Brass.
BABY DURABLE FASTENERS
12108 Cap
12205 Socket
12302 Clinch Stud
Narrow Flange
12303 Clinch Stud
Wide Flange
12402 Eyelet
12404 Eyelet
Long Post
APPLICATIONS FOR DOT BRAND FASTENERS
42
FASTENERS
Positive locking fasteners that will never open accidentally. Each stud is assembled with a spring mechanism, holding the fastener under tension until turned by hand. Standard finish – Nickel/Brass.
COMMON SENSE FASTENERS
78317
3
78318
Double Eyelet Type 3 ⁄ 16″ Barrell Length
78332
Single Height, 2-Prong Clinch Type Cutting Punch #171
Single Eyelet Type ⁄ 16″ Barrell Length
78333
Double Height, 2-Prong Clinch Type Cutting Punch #171
78322
Single Height, 2 Screw Base
78323
Double Height, 2 Screw Base
Single Height, 5⁄ 8″ #7 Wood Screw, Screwdriver #9908 Also Available:
Long Pronged Eyelet 5⁄ 16 ″ Cutting Punch #450 (C–4)
78404
78315
#12-14 Self-tapping screw Screwdriver #9908
78507
Washer for #78332, #78333
78505
Washer for #78403, #78404
78502
Washer for #78317, #78318
TENAX FASTENERS
AUTO TOP FASTENERS FOR FOREIGN CARS
Positive lock action socket – pinch to release. Nickel finish. Insert through hole in canvas and screw washer onto pronged socket with key to assemble.
Large 31/33 Nickel
11 Nickel
12 Nickel
15 Nickel
16 Nickel
35 Nickel
34 Key
43
Auto & Marine
FASTENERS
PULL-THE-DOT
A heavy duty, three-sided locking snap fastener that is built to withstand extreme pressure on three sides without unlocking. When pulled on the fourth side where the Pull-The-Dot trademark appears, the fastener releases instantly.
Auto & Marine
18100
Cap 11 ⁄ 64″ Barrell
18201
Socket
18303
Clinch Stud
10412
Eyelet 1 ⁄ 4″ Barrell
18307
Screw Stud #8 — 3⁄ 16″
LIFT-THE-DOT
Strong and heavy duty, Lift-The-Dot fasteners lock on three sides and are opened by lifting the fourth side where Dot and Lift-The-Dot trademark appear. Standard finish – Nickel/Brass.
No need to pre-punch the holes. Time Saver Attachments punch the holes as they clinch the fastener. Takes only one man one hand. The other hand is left free to pull material taut or for other functions. Pliers can be used for clamping and other purposes when Attachments are not in use. Fits over the jaws of any 10” straight jaw vise plier. Costs less than cam lever arm type bench tool.
TOLMT37 Kit
4 pc. Die Set
(Vise Grip not included)
45
Auto & Marine
ATTACHMENTS
FASTENING TOOLS
HOOVER PRES-N-SNAP
COMES WITH: #1 GROMMET DIE, CAP DIE, SOCKET DIE, STUD DIE, EYELET DIE
Presenting the versatile and easy-to-use Pres-N-Snap. It is capable of setting numerous brands of fasteners, simply by changing the dies. Many of our dies have rubber retainers to hold the fasteners in place during installation. We offer dies for standard and baby size snaps, regular and self-piercing grommets, and other various specialty applications. Its heat-treated castaluminum body make it both lightweight and durable.
Auto & Marine
DIES AND TOOLS FOR PRES-N-SNAP
Cap Die with Rubber Ring Eyelet Die with Rubber Ring Grommet Die
Sizes Available: #00 Plain Grommet #0 Plain Grommet #1 Plain Grommet #2 Plain Grommet #0 Spur Grommet #1 Spur Grommet
Socket Die
Stud Die
Also available for Pres-N-Snap: Self-Piercing Grommet Die Stud-to-Stud Die (Gypsy Stud) Pull-The-Dot Socket Die Grommet Hole Punches Lift-The-Dot Baby Durable Dies
•
•
•
•
•
C-4 Common Sense TOL4C (Scovill #450)
Cuts holes for Dot Common Sense #78403 and #78404
L-6 Lift-The Dot TOL6L (Scovill #9951)
Cuts holes for Dot Lift-The Dot #16205 and #16206
Screw Driver TOL9908
71 Punch TOL71
Screw Driver for Dot Common Sense #73815, #78324 and #78325
Cuts holes for Dot Lift-The-Dot #16349 and Common Sense #78333 and #78382
46
FASTENING TOOLS & PARTS
PRES-N-SNAP PARTS
SMALL “O” RING TOL62275 STUD “O” RING TOLN012 ⁄ ″ from Die to Die
78
Use on Plunger
Use on Stud Dies
GRAY RING TOLM2700
NUT /BOLT TOLNB
Use on Upper Dies
ADJUSTING BOLT TOLAB
LEVER
PLUNGER TOLP1
SPRING TOLSP
HANDLE TOLHA
47
Auto & Marine
FASTENING TOOLS E–Z TOOL HOLE CUTTERS
For Common Sense fasteners and Lift-The-Dot fasteners
Auto & Marine
A hand punch made of hardened tool steel that will last for years. TOLEZCS TOLEZLAD Common Sense Hole Cutter Lift-The-Dot Hole Cutter
48
FOAM SCRIM ROLLS
A wide variety of backed foam is available in various widths and thicknesses
LANDAU II FOAM is a soft, pliable closed cell polyethylene foam for use under vinyl landau tops. Non-absorbing, impervious to water. Drapeability – fits easily on compound curves. Meets Department of Transportation MVSS-302. ⁄ ″ x 60″ x 20 yds. ⁄ 4″ x 60″ x 20 yds. 3 ⁄ 16 ″ x 60″ x 20 yds.
18 1
BLACK ENSOLITE LANDAU FOAM
1
8 14
⁄ ″ x 60″ x 20 yds. ⁄ ″ x 60″ x 20 yds.
QUICK QUILT CHANNEL FOAM
Pleated polyurethane foam used in making custom pleats. The channels run up the roll with the foam laminated to a high quality muslin. 11⁄ 2″ Pleat 2″ Pleat 3″ Pleat 4″ Pleat x x x x ⁄ ″ ⁄ ″ 3⁄ 4″ 3⁄ 4″
34 34
MARINE DRI-FAST BOAT CUSHION FOAM
Constructed of an open cell foam so water can pass through. Eliminates mildew and rotting problems with foam used in marine applications. Thickness (up to 12″) x 48″ x 120″ Thickness (up to 12″) x 48″ x 60″
thick thick thick thick
x x x x
56″ 56″ 56″ 56″
wide wide wide wide
Also available in cross cut (channels run across the roll) 11⁄ 2″ Pleat x 2″ Pleat x 3″ Pleat x ⁄ ″ thick x 56″ wide 3 ⁄ 4 ″ thick x 56″ wide 3 ⁄ 4 ″ thick x 56″ wide
34
AUTOMOTIVE TOPPER PADS
1″ x 24″ x 60″ Random and Prime
CONVOLUTED FOAM
Always measure from bottom, both measurements. Both measurements of convolute must = total thickness. Example: 21 ⁄ 2 ″ + 1 ⁄ 2″ = 3″ must be total thickness. A. From bottom to bottom of valley = 1⁄ 2″ B. From to top of nipple = 21⁄ 2″ subtract Fig.A from Fig.B = nipple size 2
Keyston Bros. supplies a wide variety of foam products for different seating applications. Sew foam, plain poly rolls, slab foam, rebond foam and custom cut sizes are available. Please contact your local Keyston Bros. location or sales representative for more information.
49
GROMMETS, HOG RINGS
PM5
#TOLPM5
The PM5 Machine is a standard industry bench-mounted machine. It is made of tough ductile iron and has a deep throat and longer padded handle. This machine uses standard 3 ⁄ 8″ diameter shank dies that set grommets, washers, and snap fasteners in one motion, swiftly and efficiently.
PNEUMATIC HOG RING PLIER
#TOLTR201
(Special Order)
34
⁄ ″ 15 ga. Glued Hog Rings 10m/box #SR15
50/stick
Self-piercing grommets for use with PM5 Machine
Sharpened Self-Piercing Sheet Grommet and Washers in Brass (Also available in Nickel) Packaged 500 Sets per Bag GRMGWS210B (0) 1⁄ 4″ I.D. Brass Grommet & Washer GRMGWS230B (1) 5 ⁄ 16 ″ I.D. Brass Grommet & Washer GRMGWS250B (2) 3⁄ 8″ I.D. Brass Grommet & Washer Packaged 100 Sets per Bag GRMGWS280B (3) ⁄ ″ I.D. Brass Grommet & Washer GRMGWS300B (4) 5⁄ 8″ I.D. Brass Grommet & Washer
7 16
HOG RINGS
#HR1475
34
⁄ ″ 14 ga. Polished
25#/Box
Setting Dies for PM5 Machine
DIES210PM5 DIES230PM5 DIES250PM5 DIES280PM5 DIES300PM5 2 PC PM5 Die Set for GRM/WS210 2 PC PM5 Die Set for GRM/WS230 2 PC PM5 Die Set for GRM/WS250 2 PC PM5 Die Set for GRMGWS280 2 PC PM5 Die Set for GRMGWS300
(For Hog Ring Pliers, see page 92.)
51
Auto & Marine
HEADLINING
FOAM-BACKED HEADLINING
When you look for quality in cloth headlining, look to Keyston. This knit fabric is laminated to a urethane foam back. Excellent selection of colors available. Widths: 54″ and 60″ Color cards available upon request
Auto & Marine
VINYL HEADLINING
Type of Auto GM Plain Premier GM Perforated Premier Type of Auto Ford Crater GM & Ford Tier VW Non-Perforated V.W. Perforated
LISTING
Grey Seat Listing Folded Grey Sateen (Heavy Duty) 21⁄ 2″ Folded to 11⁄ 4″ 50 Yards per Roll White Headlining Listing Folded White Sateen 21⁄ 2″ Folded to 11⁄ 4″ 50 Yards per Roll
Bias slit to prevent raveling
52
LANDAU MATERIAL
VINYL LANDAU TOPPING
O.E.M. Colors and Patterns
LK E
Top quality vinyl meets O.E.M. standards for:
LANDAU TOPS
Ready-made landau tops. Stocked in universal style double seam or center seam. Other styles available — special order.
LANDAU MOLDINGS
C-2000 “C” Chrome
Brite dipped anodized, polished to a chrome-like finish. Available in 7′ or 14′ lengths.
Color Key Track
#KRAIL
Aluminum Track used in conjunction with our Color Key Extrusions. Available in 6′ lengths.
Keyhole Clip
#9850
Molded from White Nylon Plastic. Designed to secure C-2000 moldings.
53
Auto & Marine
LEATHER
LEATHER
Nothing takes the place of real leather
Genuine upholstery leather is Nature’s product. This means that such natural characteristics as barbed wire scratches, veins and horn marks may be healed over and be apparent to the eye, but this does not mean inferior quality or lack of durability. Such marks of Nature are your guarantee of top grain leather. The finest grades of upholstery leather are oft times hand grained or left in the natural grain. In either case there will be variation from one part of the hide to another. Such natural grain variation must be expected, as it differentiates genuine leather from the imitations where a printed pattern may be noticeable as it is repeated. When buying quality furniture covered with genuine leather, especially in mottled two-tone color, remember that no small swatches can show all of the various shadings and color in a whole hide and we would be happy to submit larger samples for approval. These genuine leathers are all custom finished by hand to meet the highest standards in the industry. Careful attention to subtle blending and mottling cannot be obtained by automatic equipment used in producing imitation materials.
Auto & Marine
CUTTING INSTRUCTIONS FOR GENUINE LEATHER
A hide of genuine leather is nature’s product and caution must be exercised in cutting one. The above diagram shows various areas of a hide and they are cut as follows: Section A should be used in cutting seat tops, inside backs, cushion bands and other sections that will receive the most strain and flexing. Section A is the prime portion of a hide. Section B should be used for outside arms, backs, hidden bands or any other parts of furniture that receive little or no flexing. The flank sections must be used on outside backs and non-wearing surfaces in order to avoid trouble. Flank fibers run generally in one direction as indicated by the arrow. In applying flank sections to a chair, the first pull should be taken in the direction of the arrow. A stretch at right angles to the direction of the arrow may cause the finish to crack.
Special Colors Made to Order
Our card shows a wide range of colors. However, in the event that there is no satisfactory color to meet your special requirements, we are in a position to create special colors to match your fabric, carpet, or wallpaper. It is important in such cases that you specify whether or not you require a solid or a mottled two-tone color, and shiny or dull finish.
Color Variations
It is important to bear in mind that all of the leathers shown on this card are hand finished. Many of the colors shown are mottled two-tone leathers and in a small sample it is not possible to portray the color variations and shadings which occur in hand padding or glazing of such leathers.
How to Calculate Leather from Fabric Yardage Requirements
For every yard of 36″ fabric, order 12 square feet of leather. For every yard of 50″ fabric, order 17 square feet of leather. For every yard of 54″ fabric, order 18 square feet of leather.
All of our leather is sold by the half-hide (20–25 sq. ft.) or full hide (40–60 sq. ft.)
54
LEATHER
Detroit Original Match-Up Leather
Sold by the full hide, half-hide or square inch. See your current Detroit match-up book for color selection.
Keyston Bros. proudly presents Angus and Arran. These two leathers provide the supreme combination of durable beauty, lustrous strength and contemporary styling. Traditional colors allow the use of these leathers anywhere that luxurious quality is desired.
Selection—The Key to Quality
Scotland is the home of the world’s best upholstery hides. Angus and Arran Scottish leathers from Keyston are chosen from only the top 5% of the available hides. With practiced eyes and care passed down through generations, Scottish craftsmen inspect each hide. Slowly the pile of rejected hides grows and worn hands pass on only the hides of Angus and Arran quality. These quality hides are inspected a minimum of 16 times to assure that only the best remain. In addition to thorough inspection, rigorous laboratory testing confirms that each hide will meet the tough standards of durability, coloration, and rigorous flammability specifications. Angus and Arran leathers feature large hides of regular thickness with little or no scarring in the lustrous finish. You’ll find that each Angus and Arran hide will age through the years, with a grace of fine scotch whiskey.
It’s the Water…and More
Like fine scotch, it’s the soft, pure water from the Scottish highlands which gives Angus and Arran their unique feel and lustrous appearance. And, though soft and flexible, Angus and Arran have the strength for stitching, pleating, buttoning, and compound contours. Flexibility is the key to a finish that resists scratching, staining, and cracking. In addition, Angus and Arran are aniline dyed and finished with a special durable protective coating.
Specifications:
Flammability: Lightfast: Tensile strength: Elongation at break: Pass, FAR 25.853 12 second vertical 5 minimum, Blue Scale 145 Kg/cm2, SLP6 53%, SLTC SLP6 Tear force: Flexibility of finish: Adhesion of finish: Fastness to rubbing-wet: 116N, SLTC SLP7 10,000 cycles, no break, BS3144, 1968 700g/sq.cm., SLF/11 200 minimum, 1 UF/450
PARTNERS: A WINNING COMBINATION
Partners is a stunning combination of rich leather and economical matching vinyl for today’s needs. It’s an ideal combination of leather’s subtle, rich beauty and vinyl’s attractive, tough durability. Both Partners leather and vinyl are designed to match today’s OEM automotive interior colors. Partners has a multitude of uses in today’s marketplace, from transportation to hospitality and home furnishings. In addition, perforated Accent leather is available in selected colors for specialized applications. Consider Partners for your leather or leather-look-alike needs. It’s a winning combination!
Specifications
STANDARD
Thickness Abrasion Cold Crack *Flammability Top Coat Adhesion
TEST
LEATHER REQUIREMENT
1.0–1.2 mm H-18 TABER/300 CYCLE/500G No Cracking – 30C 100 mm/min.max. 3N/CM min.
RESULT
1.0 mm Pass Pass 30 mm.min. Pass 5N/cm Pass
VINYL
Thickness 45 GA 40/45 +Cold Crack -10° F Cracking Fed STD 191 A Pass Abrasion 200 Cycles Meets MVSS 302 & California Tech 117 Flexing: 15,000 Cycles 300 Hours Colorfastness to Light
ASTM D 1813 ASTM D 3884 ASTM D 1912 MVSS 302 & Calif. 177 ISO 11844
*NOTE: The term “Flammability” and any corresponding data refer to typical performance in the specific test indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions. This information is offered for your general guidance only. It is accurate to the best of our knowledge at the time of printing, but it is not intended to relieve the user from its responsibility to investigate and understand other pertinent sources of information and to comply with the laws and procedures applicable to the safe handling and use of this material. For a complete list of specifications ask your local branch or Sales Representative. Partners hides average 40 to 55 sq.ft. each. One yard of 54” wide fabric is equal to about 17 square feet of leather. Partners accent only comes in 1/2 hides averaging 18–23 sq.ft. each.
55
Auto & Marine
KEYSTON BROS. ANGUS AND ARRAN
MARINE BOAT FRAME KITS
UNIVERSAL BOAT TOP FRAMES
Made with 7/8″ O.D. x .058 wall, marine aluminum tubing with brite anodized finish and joined together with inside sleeves. Comes in ready-to-assemble kit form. Boxes can ship UPS. Kits include: Aluminum tubing and splicers Jaw slides Eye Ends Deck Hinges 1″ Slide Buckles Deck Straps 1″ Snap Hooks
Auto & Marine
STANDARD 2-BOW FRAME MH4850 - NYLON HARDWARE MH4850-D - DIE CAST HARDWARE
PONTOON BOAT FRAME
1 x 1 x .062 Extruded Satin Anodized Square Tube
MH4854 Nylon Hardware
56
MARINE HARDWARE
DIE CAST MARINE FITTINGS
Zamak dual chrome plated, heavy duty and regular.
MH86000
– Regular for 7/8″ O.D. Tube
MHF800104 – Heavy duty Zamak for 7/8″ O.D. Tube
JAW SLIDES
MH86004 – Regular for 7/8″ O.D. Tube MHF800164 – Heavy Duty Zamak for 7/8″ O.D. Tube
DECK HINGES
MH86002 – Regular 2-hole Top Mount
MHF800200 – Heavy Duty Zamak Top Mount MHF800230 – Heavy Duty Zamak Angled Base MHF800250 – 2-Hole Side Mount
MH86002 MHF800200
MHF800250
57
Auto & Marine
EYE ENDS
MARINE HARDWARE
NYLON MARINE FITTINGS
Made of unbreakable Nylon, all parts are completely resistant to sun and sea damage. Stocked in white and black in some Keyson locations.
Auto & Marine
EYE ENDS
MH265 MH278 MH718 Inside Eye End for 3/4″ O.D. Tube Inside Eye End for 7/8″ O.D. Tube Outside Eye End for 7/8″ O.D. Tube
MH718
MH265 / MH278
JAW SLIDES
MH804 MH878 Jaw Slide for 3/4″ O.D. Tube Jaw Slide for 7/8″ O.D. Tube
MH804 / MH878
DECK HINGES & MISCELLANEOUS PARTS
MH504 MH504A MH604L MH100 MH101 MH600 MH2520 MH429 MH448 MH456 MH704 MH7530 Large Deck Hinge Angled Deck Hinge Deck Hinge Slide Combination with Fillister Lock Screw – Fits Slide Track 2-Hole Side Mount Deck Hinge Side Mount/Slide – Fits Slide Track Slide Lock for Slide Track Nylon Head 1/4″ x 20 Screw – Fits all Side Mounts and Deck Hinges Slide Track End Caps 3/4″ Tube Connector 7/8″ Tube Connector Pad Eye Deck Hinge Wedge
MH504
MH504A
MH604L
MH100
MH101
MH600
MH7530
MH2520
58
MH704
MH429
MARINE HARDWARE
STAINLESS STEEL TOP FITTINGS
High quality cast 316 Stainless Steel – Highly Polished. Used to construct bimini top frames.
MH100SS MH204SSD MH101SS MH105SS
Eye End for 7/8″ O.D. Tube HD Eye End for 7/8″ O.D. Tube w/2 Set Screws Eye End for 1″ O.D. Tube HD Eye End for 1” O.D. Tube Jaw Slide for 7/8″ O.D. Tube HD Jaw Slide 2 Set Screws for 7/8″ O.D. Tube Jaw Slide for 1″ O.D. Tube HD Jawslide 2 Set Screws for 1″ O.D. Tube 7/8″ Break-a-part Jawslide 1″ Break-a-part Jawslide Regular 2-hole Top Mount Deck Hinge with Removable Pin Angled Base Deck Hinge Adjustable Deck Hinge; adjusts from 0° to 135° Concave Base Deck Hinge 2-hole Side Mount Deck Hinge 4-hold Side Mount Deck Hinge Stainless Quick Release Deck Hinge SS Deck Hinge w/o Pin 1/4″ Drilled Hole SS Angled Deck Hinge w/o Pin 1/4″ Drilled Hole Cam Style Quick Release Pin Quick Release Pin 6″ Lanyard Wire for Quick Release Pin Quick Release Pin with Lanyard Wire 6″ Lanyard w/ tab 1″ Nickel/Brass Snap Hook 1″ Stainless Steel Snap Hook 1″ Stainless Steel Adjuster Buckle 1″ Nickel/Brass Adjuster Buckle 1″ Nickel/Brass D-Ring 1″ Stainless Steel D-Ring High profile Stainless Steel Pad Eye Regular Stainless Steel Pad Eye 90° Fast Round Eye – Cast Brass/Nickel Plated
59
110YD/RL Part # MHKEDERB - BLACK 110YD/RL MH5531 MH7031 Description 55″ 3 in 1 Pole 70″ 3 in 1 Pole
WINDSHIELD SPRAY WELT WEATHER STRIPPING
This sewable weather stripping is ideal for use on the lower border of clear vinyl enclosures and the front edge of convertible tops where they attach to the windshield. The pliable, foam-filled vinyl gasket makes an excellent 3/8″ seal between the canvas product and the surface it’s fastened to. The weather stripping has a full 3/4″ sewable flange and comes in a neutral grey, black, and white.
Put up on 500 feet and 100 feet rolls.
MOORING POLE HARDWARE
3/4″ Pole End 7/8” Rubber Tip Snap Pole End Joiner Section
MH7622
MH7620
MH7621 MH7624
3/4″ 7/8″
MH7623 3/4″ to 7/8″ Joiner
VENTING SYSTEMS
VENT-SO-PORT
Made from high impact, black molded ABS plastic, with UV stabilizers, the Vent-So-Port cap slips onto an aluminum mooring pole. The large dome allows air to circulate freely, reducing condensation, mildew and rust beneath the supported boat cover. Cap replaces the mooring pole grommet and attaches to the boat cover with four stainless steel screws (included with the cap). The Vent-So-Port system is ideal for use with non-breathable boat cover fabrics. It is sturdy, lightweight and easy to install.
MH1
60
MARINE HARDWARE
MARINE TUBING
Aluminum and Stainless Steel
BRITE ANODIZED HARD DRAWN ALUMINUM TUBING
MH3458 MH785820A MH7824A MH786520A MH786524A 3/4″ O.D. x .058 Wall x 20′ Length 7/8″ O.D. x .058 Wall x 20′ Length 7/8″ O.D. x .058 Wall x 24′ Length 7/8″ O.D. x .065 Wall x 20′ Length 7/8″ O.D. x .065 Wall x 24′ Length 54 Pcs/Cs 38 Pcs/Cs 38 Pcs/Cs 38 Pcs/Cs 38 Pcs/Cs
POLISHED STAINLESS STEEL TUBING #304
MH78202SS MH7824SS MH786524SS MH786520SS MH124 MH106520SS MH106524SS 7/8″ O.D. x .049 Wall x 20′ Length 7/8″ O.D. x .049 Wall x 24′ Length 7/8″ O.D. x .065 Wall x 24′ Length 7/8″ O.D. x .065 Wall x 20′ Length 1″ O.D. x .049 Wall x 24′ Length 1″ O.D. x .065 Wall x 20′ Length 1″ O.D. x .065 Wall x 24′ Length 35 Pcs/Cs 35 Pcs/Cs 35 Pcs/Cs 35 Pcs/Cs 25 Pcs/Cs 25 Pcs/Cs 25 Pcs/Cs
Extruded Vinyl Awning Welt
100′ per Roll MH600T Black MH600TW White
Flat Piano Hinge – 6′ Length Mill Finish with 3/16″ Holes Punched on 4″ Centers Boat Seat Hinge – 6’ Length Mill Finish Formed Hinge .060 Gauge Drilled on 2” Centers, 1/2” Staggered
Bendarc 12′ radius for 11⁄ 4″ round stainless. Note: 1″ square and 11⁄ 4 ″ round models have the forming block encased in steel plate for extra strength and long life. Bendarc Quick-Switch professional benders have interchangeable dies for tube size and radius. The following parts allow you to change tube and radius sizes.
Bendarc Quick-Switch Parts List
Forming Blocks Bendarc Roller Clamp Block When ordering a forming block in a different tube size for your Bendarc Quick-Switch, you will also need a clamp block and roller in that size. Older Bendarcs will not accept Quick-Switch parts. Quick-Switch models have handles made from square steel with 3 or 4 positions for the roller. Older 3-hold handles cannot use 12″ radius. Bendarc rollers have oil impregnated sleeve bearings for long life. Bendarc is available in a double, highproduction, sliding model. 6″ radius 8″ radius 10″ radius 12″ radius
Crownarc
Sizes: 3 roller crank driven crowner Crownarc for round tubing rolls both 7/8″ and 1″ round tubing.
Crownarc Parts List
Center Roller w/bearing Outer Roller-not mounted Outer Roller-gear mounted Slide Block Assy (3 pc) (New style-minimizes wobble) Hand Grip (New style-polished, heavy duty) Crank Arm (Pre-bent, drilled) Back Plate w/Weld Nut Older Crownarcs will accept square rollers if they have 3 ⁄ 4 ″ roller shafts, 8 3 ⁄ 8 ″ on center between the lower rollers.
62
MARINE TOPPING, HULLINER
MANUFACTURERS OF ENGINEERED COATED FABRICS
HULLINER
Auto & Marine
• • • • • •
Durable – stands up to marine environment Excellent colorfastness – resists sunfade Easy to cut, fit, and mold to desired shape Resists mold and mildew Resists stains and soiling – easily cleaned Will not fray or unravel
COLOR & PATTERN # Geometric Ivory Geometric Oyster Geometric Sand Stratos Sand (Velour) Geometric Silver Stratos Silver (Velour) Geometric Surf Stratos Surf (Velour) WIDTH 72″ & 144″ 72″ 72″ 72″ 72″ 72″ 72″ 72″
Vinyl Coated Marine Topping
Poly/Cotton Backing 56″ Wide – 24 oz. per Square Yard Approximately 60 Yards per Roll
Haartz vinyl coated marine topping is ideal for boat tops and covers. It is waterproof and mildew resistant.
PATTERN # BT200 BT205 BT235 BT245 BT1168 BT215 BT230 BT235 BT501 BT502 BT504 BT506 BT508 BT510 BT701 BT704 BT705 BT706 BT710 COLOR Sea White/Charcoal White/Charcoal Bayliner Tan/Charcoal Capri Grey/Charcoal Bayliner Warm Grey/Charcoal Sea White/Slate Grey Electric Blue/Blue Bayliner Tan/Black Bayliner White/Grey Bayliner Dream White/Grey Bayliner Absolute Grey/Grey Bayliner U.S. Sand/Grey Bayliner Navy/Grey Bayliner Limited Grey/Grey Dream White/Grey White White Linen/Grey Mariner Blue/Grey Sand/Grey Bayou/Grey GRAIN Kid Standard Standard Standard Sierra Kid Standard Standard Doe Doe Doe Doe Doe Doe Burbank Burbank Burbank Burbank Burbank
PART NO. HLM93G HLM48G HLM38G HLM38S HLM66G HLM66S HLM27G HLM27S
NAUTOLEX MARINE TOPPING
54″ Wide, 60 Yards per Roll
BTN329 BTN330 BTN331 BTN332 BTN333 BTN334 BTN335 BTN336 Brite Navy Cinder Gray Hearty Burgundy Mystic White Sandrift Seaman Blue Slate Black Tide Pool Green
63
NEEDLES
Curved Round Point Curved 3 Square Point Curved Leather Point
Upholsterer’s Regulator with Eye
Osborne No. 3061 ⁄ 2
Sizes 8″, 10″, and 12″ overall (stock sizes). All 9 gauge.
Length 6 8 10 12 inches Light 9 9 8 7 gauge 8″ and 10″ stock sizes. 6″ and 12″ special order.
65
Auto & Marine
NEEDLES, SEWING MACHINE
REGULAR SEWING MACHINE NEEDLES
MACHINE NUMBER Standard Sizes NEEDLE SYSTEM 135 x 17 NEEDLE SIZE 18,19,20,21,22,23,24 kerosene or naphtha and lubricate rotating loop taker with a few drops of oil. 7) There is a sharp edge on the rotating loop taker, bobbin case, bobbin or needle. Smooth same as in the foregoing chapter. 8) Bobbin sides may be bent, nicked or distorted and bobbin will not turn freely. Such bobbins should be discarded and replaced. d. Skipping Stitches. If the needle thread fails to catch the bobbin thread, the machine will not sew or will leave skips in the stitches. To remedy this trouble, time the needle with the needle bar according to instructions. e. Drawing of Seam. If the threads draw or pucker the seam, adjust tension. f. Stitches Uneven or Stitches Piled Up. If the stitches pile up in one place, adjust the stitch length regulator for longer stitch. Also, if indicated, the presser foot pressure on the material should be increased. Check rise of teeth of feed dog above surface of needle plate. They should rise to the extent of their full depth. g. Feed Dog Striking Throat Plate. If the feed dog strikes the throat plate, adjust the feed dog to rise above the throat plate no further than the depth of the feed dog teeth. Also check travel of feed dog within slots in throat plate. Also observe if, with machine set for longest stitch, the feed dog strikes either the front or the rear of the feed dog slots in the throat plate. The simplest remedy for this problem is a slight reduction in stitch length to avoid such striking. There is also the possibility of an accumulation of lint and debris from sewing between the feed dog and the underside of the throat plate. Remove throat plate from machine bed by loosening its screws and brush out from feed dog any foreign matter which may have become packed into its slots and between its teeth. Also, wipe clean underside of throat plate. Replace throat plate on machine bed, tightening its screws.
Put up 10 per pack, 100 per box. Many other styles available Special Order; 100 minimum.
Troubleshooting Guide
This section contains abbreviated troubleshooting information which can be of help in determining and removing the causes of trouble that may develop in the machine. When the troubles covered by this section develop, they can be conveniently tracked down and readily corrected by consulting the following listing: a. Needle Breakage. 1) Needle is loose in clamp. Tighten clamp screw. 2) Needle of incorrect class and variety is being used; compare needle with one of correct type. 3) Presser foot is loose or out of line. Straighten and tighten it. 4) Needle is too light for the fabric. Select the correct needle. 5) Operator is pulling on fabric. DO NOT assist machine in feeding material. b. Needle-Thread Breakage. 1) Thread is too heavy for the needle. Insert thicker needle. 2) Right-twist thread is being used. ONLY LEFT twist thread must be employed. 3) Damp or defective thread is being used. Use dry, smooth thread. 4) Machine is incorrectly threaded; follow threading diagram for specific machine involved. 5) Needle is incorrectly set. Set the needle with the short groove closest to loop taker. 6) Upper tension is too tight; adjust for correct stitch balance.
7) Thread take-up spring is out of adjustment. 8) There is a sharp edge on the rotating loop taker, bobbin case or tension controller; smooth with finest emery cloth (320 grit) or oilstone and polish with rouge cloth. 9) Needle is rubbing against presser foot. Adjust and tighten the foot. 10)Needle is defective, blunted or bent at the point. Use a good, new needle. 11)Needle hole in feed dog is sharpedged or burred. Smooth offending areas. c. Bobbin-Thread Breakage. 1) Defective or damp thread is being used. Use dry thread of correct size. 2) Bobbin case tension is too tight. Adjust to obtain well-balanced stitches as described under “Thread Tensions.” 3) Bobbin case is incorrectly threaded. 4) Bobbin is wound too full to revolve freely. Take off thread to below the rim of the bobbin and adjust the bobbin winder to avoid winding bobbin with an excess of thread. 5) Rounds of thread on the bobbin are lapped over one another; unwind bobbin manually and rewind evenly and uniformly. 6) Bobbin case is sticky with gummy oil and/or lint. Clean the bobbin case and rotating loop taker with
66
PANEL BOARDS, QUILTED VINYL
PANEL BOARDS
Embossed Fiber Board for Kick Panels, Doors and Other Miscellaneous Uses
NUMBER PB-7 PB-7XL PB-1 PB-9 PB-9XL COLOR Waterproof Waterproof Uncoated Black Black SIZE 32″ x 48″ 39″ x 65″ 39″ x 61″ 39″ x 61″ 39″ x 65″
MARINE UPHOLSTERY QUILT
Flotilla Marine Vinyl
11⁄ 2″ pleat, 10 oz. high loft polyester filler, heat sealed. Approximately 54 inches wide, 15 yards per roll. Keyston offers marine vinyls quilted for your marine and outdoor needs. Marine vinyls are made with ultraviolet inhibitors, filled with polyester batting, and have a polyester back for mildew protection. Polyester also does not absorb and retain water like foam-filled quilted vinyls. QP554 Snow White QP569 Marine White
ROLL AND PLEAT
Oxen Grain — 7 Colors
11⁄ 2″ pleat with 1⁄ 4″ foam, a non-woven back, heat sealed. Approximately 54 inches wide, 15 yard rolls.
67
Auto & Marine
RIVETS
RIVETS
Non-Structural — Break Mandrel Rivets
LOW COST: Substantial savings in installed costs can be realized when rivets are substituted for spotwelds, screws or bolts. FAST INSTALLATION: Quick and easy to use with hand or power riveters, rivets have endless fastening applications in manufacturing, maintenance and repair. The rivets listed in this catalog are unbeatable for blind or limited access jobs because they are installed from one side with a minimum of back-side clearance required. The economics to be gained by one-man installation, simple inexpensive tooling, and low cost fasteners also make rivets ideal for open or non-blind applications. The rivets listed herein meet all industry standards and may be installed with most blind rivet tools made to industry standards by other manufacturers.
4-4 NO. 4-2 4-3 4-4 4-5 4-6 4-8 4-10 4-2LF 4-4LF 4-6LF SSAR Protruding Head Protruding Head Protruding Head Protruding Head Protruding Head Protruding Head Protruding Head Large Head Large Head Large Head Back Up Washers
For preventing or stopping squeaks. Extruded Vinyl available in Black. Vinyl Covered available in Black and Silver.
Style 180
Large bead as in OEM style, snipped flange for easy tailoring. 100 yard spools. 40 OEM Colors.
SMOOTH-TITE
Style 120
Small bead as in OEM style, scalloped flange for easy tailoring. Black only. Vinyl Extrusion 25 Yard Rolls Crush Grain, White or Black
5 8″
⁄
69
Auto & Marine
SCREENING & MESH TEXTRA II
Open Weave Vinyl Coated Polyester
54″ Wide, 12 oz. per square yard, 17 x 11 count. Filters 70% of UV rays. Approximately 65 yard rolls. Available in 15 colors. Non-flame retardant. Applications: Boat cushions, umbrellas, outdoor furniture, upholstery, safety vests and more. This unique 17 x 11 count open weave fabric, designed especially for extended outdoor life, is made from PVC coated yarn. Textra II offers excellent resistance to ultraviolet, mildew, stains, abrasion and harsh weather. With exceptional moisture resistance, it dries quickly, and it won’t shrink. Textra II also provides high tensile and tear strength for a variety of outdoor applications.
Auto & Marine
SUNSURE
Vinyl Coated Polyester Woven Mesh
56″ Wide, 18 oz. per square yard, 42 x 12 count. Filters 90% of UV rays. Approximately 60 yard rolls. Available in 14 colors. Sunsure is breathable, ultraviolet resistant, and mildew resistant. Uses include awnings, umbrellas, boat cushions, windshield covers, and outdoor furniture.
FIBERGLASS SCREENING
Vinyl Coated Fiberglass Mesh
48″ wide, 18 x 14 count, 100 feet per roll. Charcoal. This vinyl-coated fiberglass screening is long-lasting, rot-proof, stable and easily repaired. Plus, it will not rust, shrink, corrode, scratch, or stain.
MARINE MESH UNDERLINING
54″ wide, 100 yards per roll. Black, Gray, White or Tan. An underlining for boat cushions that breathes, releases moisture, and resists rot and mildew.
60″, 72″ or 74″, black, complete with hardware. One set of belts has a male and a female part. (All components needed to restrain one passenger.) (Lap restraints only.) Available in 2 styles: “Rectangle” or “Dog Bone” and in 3 sizes. Overall size: Small Medium Large 6 1⁄ 4″ x 11 3⁄ 4″ 7 7⁄ 8″ x 15 1⁄ 4″ 9 1⁄ 2″ x 19 1⁄ 2″
SEAT BELT BLACK POLYESTER WEBBING
2″ wide, 5-bar 5000 pound test or 6000 pound test
Bulb fits all sizes – order separately. Lumbar supports can be fitted in various ways:
• inserted directly into foam • stapled to a wooden frame • fixed to springs with hog rings
71
Auto & Marine
Made from vulcanized rubber, suitably reinforced to permit attachment by staples, clips, etc.
SEWING MACHINES
206RB-4 / 206RBL-4
Heavy Duty Single Needle Drop Feed, Needle Feed
(Compound Feed)
Auto & Marine
206RB-4
Alternating Presser Feet Lockstitch Machine 206RBL-4 Long Arm Version (25″)
with: Centralized arm lubrication Reservoir-oiled hook with micrometric control valve Large horizontal axis rotary hook and bobbin Reverse feed Safety clutch
APPLICATIONS • For sewing light to heavyweight materials such as leather, vinyl, upholstery, synthetics, canvas and various coated and laminated products. • Designed for stitching such products as auto, boat and furniture upholstery, tarpaulins, covers, sails, tents, camping trailer covers, awnings, umbrellas, tops, bags, luggage, handbags, travelware accessories, sports and camping equipment, wearing apparel, outdoor clothing, canvas shoes, slippers, orthopedic appliances, etc. FEATURES • Extra long stitch — 2 1⁄ 2 S.P.I. (10mm). • Large Bobbin. Bobbin can be changed without removing object being sewn. • Thread release finger (for heavy thread) • High presser foot lift — 9 ⁄ 16″ (14mm) • Centralized arm lubrication. Reservoir-oiled hook with micrometric control valve. • All gear driven hook mechanism. Large horizontal axis hook. • Safety clutch with push-button re-engagement. • Reverse stitching. • Simple adjustment permits raising and lowering of the center foot which allows for sewing different thicknesses of material and thus assures positive stitching. • Walking feet, needles and other attachments interchangeable with Consew Model 226R-2. • Needle plate, foot and feed dog can be changed for special operations. • Standard attachments easily installed. • Compound feed, walking foot mechanism insures even feeding of material.
206RBL-4
SPECIFICATIONS FOR 206RB-4 Speed, Max. (S.P.M.) 3300* 9 ⁄ 16 ″ (14mm) Clearance Under Foot Needle Bar Stroke 1 5 ⁄ 16 ″ (33mm) Stitch Length, Max. 2 1 ⁄ 2 s.p.i. (10mm) Needle 135 x 17 Metal 18034 Bobbin Pre-wound M Hook 18033 Work Space 10″ (254mm) Bed Size 7″ x 18 7 ⁄ 8 ″ (178 x 480 mm) Stitch Type 301 *Speed depends on thread, material and operation. SPECIFICATIONS FOR 206RBL-4 Long Arm (25″) Speed, Max. (S.P.M.) 1800* 9 ⁄ 16 ″ (14mm) Clearance Under Foot Needle Bar Stroke 1 5 ⁄ 16 ″ (33mm) Stitch Length, Max. 2 1 ⁄ 2 s.p.i. (10mm) Needle 135 x 17 Metal 18034 Bobbin Pre-wound M Hook 18033 Work Space 25″ (635mm) Bed Size 7″ x 33 9 ⁄ 16 ″ (178 x 852mm) Stitch Type 301 *Speed depends on thread, material and operation.
APPLICATIONS • For sewing light to heavy-weight fabric, canvas, leather, vinyl, synthetics and various coated and laminated materials. • Designed for stitching such products as auto, boat and furniture upholstery, tarpaulins, covers, awnings, tents, umbrellas, handbags, luggage, travelware accessories, sports and camping equipment, sails, wearing apparel, outdoor clothing, footwear, foundation garments, orthopedic appliances, etc. FEATURES
• • • • • • • • •
Compound feed, walking foot mechanism insures even feeding of material. Simple wing nut adjustment permits raising and lowering of the center foot to allow for sewing different thicknesses of material. Safety clutch prevents the hook from being damaged. Safety-type handwheel. Stitch length indicator at outside of handwheel. Vertical axis rotary hook. All sizes of cording feet available. Standard attachments easily installed. Reverse stitching.
SPECIFICATIONS FOR 226R-2 Speed, Max. (S.P.M.) 3000* 9 ⁄ 16 ″ (14mm) Clearance Under Foot Needle Bar Stroke 1 5⁄ 16 ″ (33mm) Stitch Length, Max. 5 s.p.i. (4.5mm) Needle 135 x 17 Metal 10656 Bobbin Pre-wound G Hook 10655 Work Space 10 1 ⁄ 4 ″ (258mm) Bed Size 7″ x 18 7⁄ 8″ (177 x 477 mm) Stitch Type 301 *Speed depends on thread, material and operation.
73
Auto & Marine
High Speed Single Needle Drop Feed, Needle Feed
SEWING MACHINES
HEAVY DUTY WALKING FOOT SEWING MACHINE
Auto & Marine
MODEL 280LS
with Automatic Safety Clutch Mechanism When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged.
FEATURES:
• • • • •
Large bobbin size Large rotating hook Lever reverse feed Long needle stroke High lift presser feet
ALSO AVAILABLE: 280LS18
18” Long Arm
74
SEWING MACHINES
MODEL 1245
APPLICATIONS
Sewing medium-heavy materials, e.g. furniture and car upholstery, leather clothing, leather goods, etc.
FEATURES • High traction due to unison feet. • Even feed motion without any ply-shift of individual layers. • Large vertical rotary hook with 60% more bobbin thread capacity than other standard-sized hooks. • Automatic hook lubrication. • Efficient hook protection due to standard built-in overload coupling (M). • Rugged and durable. • High top feed lift (7mm) allows trouble-free sewing of thick materials and easy sewing over cross seams. • Easy to service. • Easy loading and unloading, even of bulky material, due to 14mm high fabric clearance. SPECIFICATIONS
Stitch type Maximum speed** Top feed lift Fabric clearance Needle system Needle size (in 1/100mm) 301 (lockstitch) 2800 S.P.M. 7mm Max. 14mm 134 x 35 110-140 Balance wheel Motor power Clear work space 80mm effective diameter 0.370 or 0.550 kW, depending on equipment 270 x 115mm
**Depending on setting of top head lift, material and production process.
WALKING FEET with TEETH
240135 Outside Foot 240158 Inside Foot
WALKING FEET with TEETH
240517 Outside Foot 240518 Inside Foot
OUTSIDE FOOT
INSIDE FOOT
OUTSIDE FOOT
INSIDE FOOT
S94 OUTSIDE FOOT
S93 INSIDE FOOT
WELTING FEET
In Sets: (Set consists of inside and outside foot)
S32-1 ⁄ 8″ S32-5 ⁄ 32″ S32-3 ⁄ 16″ S32-1 ⁄ 4″ S32-5 ⁄ 16″ S32- ⁄ ″
38
WELTING FEET WITH BACK CUT-OUT
(Ideal for Sewing Around Corners)
In Sets: (Set consists of inside and outside foot)
S68- ⁄ ″
18
NEW STYLE DOUBLE WELTING FEET
In Sets: (Set consists of inside and outside foot)
S95-1 ⁄ 8″ S95-3 ⁄ 16″ S95-1 ⁄ 4″ S95-5 ⁄ 16″ S95-3 ⁄ 8″ Set, New Style Double Welting Feet, Gauge Size: 1 ⁄ 8″ Set, New Style Double Welting Feet, Gauge Size: 3 ⁄ 16″ Set, New Style Double Welting Feet, Gauge Size: 1 ⁄ 4″ Set, New Style Double Welting Feet, Gauge Size: 5 ⁄ 16″ Set, New Style Double Welting Feet, Gauge Size: 3 ⁄ 8″
S32-1 ⁄ 2″ S32-5 ⁄ 8″ S32-3 ⁄ 4″
Set Welting Feet Gauge Size: 1 ⁄ 8 ″ Set Welting Feet Gauge Size: 5 ⁄ 32 ″ Set Welting Feet Gauge Size: 3 ⁄ 16 ″ Set Welting Feet Gauge Size: 1 ⁄ 4 ″ Set Welting Feet Gauge Size: 5 ⁄ 16 ″ Set Welting Feet Gauge Size: 3 ⁄ 8 ″ Set Welting Feet Gauge Size: 1 ⁄ 2 ″ Set Welting Feet Gauge Size: 5 ⁄ 8 ″ Set Welting Feet Gauge Size: 3 ⁄ 4 ″
S68- ⁄ ″
3 16
S68-1 ⁄ 4″ S68-5 ⁄ 16″ S68- ⁄ ″
38
S68-1 ⁄ 2″
Set Welting Feet with Back Cut-Out, Gauge Size: 1 ⁄ 8 ″ Set Welting Feet with Back Cut-Out, Gauge Size: 3 ⁄ 16 ″ Set Welting Feet with Back Cut-Out, Gauge Size: 1 ⁄ 4 ″ Set Welting Feet with Back Cut-Out, Gauge Size: 5 ⁄ 16 ″ Set Welting Feet with Back Cut-Out, Gauge Size: 3 ⁄ 8 ″ Set Welting Feet with Back Cut-Out, Gauge Size: 1 ⁄ 2 ″
Rule for ordering welt feet: For uncovered cord allow double the size for your material; e.g., 1 ⁄ 8″ cord = 1⁄ 4″ feet, 5⁄ 32 ″ cord = 5 ⁄ 16 ″ feet.
76
SEWING MACHINE PARTS, OIL
OUTSIDE
INSIDE
INSIDE
PFAFF WELTING FEET
In Sets: (Set consists of inside and outside foot)
42519x20-1 ⁄ 8 ″ 42519x20-5 ⁄ 32 ″ 42519x20-3 ⁄ 16 ″ 42519x20-1 ⁄ 4 ″ 42519x20-5 ⁄ 16 ″ 42519x20-3 ⁄ 8 ″ Set Welting Feet Gauge Size: 1 ⁄ 8 ″ Set Welting Feet Gauge Size: 5 ⁄ 32 ″ Set Welting Feet Gauge Size: 3 ⁄ 16 ″ Set Welting Feet Gauge Size: 1 ⁄ 4 ″ Set Welting Feet Gauge Size: 5 ⁄ 16 ″ Set Welting Feet Gauge Size: 3 ⁄ 8 ″
TOE ON LEFT SIDE
INSIDE
TOE ON RIGHT SIDE
PFAFF SINGLE TOE WALKING FEET
Outside Foot Inside Foot 91-040475-04 91-040474-93
PFAFF SINGLE TOE WALKING FEET
Inside Foot Outside Foot 91-049085-93C 91-049558-CD
“UNIVERSAL” SHEAR SHARPENERS
For everyone who uses shears
EASY STEPS: Clamp shear blade in jaw of vise. Adjust Support Slides under blade. Set Ball Post to hold stone at correct level. Sharpen with sliding motion forward to right.
10 Reasons why you need this machine…
1 2 3 4 5
Sharpens blades to any bevel desired. Will easily follow blade contour. Stones usable all 4 sides. Superbly finished—each machine equipped with top quality abrasive stones. Quick and accurate. Even sharpening the entire length of the blade.
6 7 8 9
Saves blade life—removes only enough material to bring shear sharp. Does not remove blade temper. Sharp shears increase employee efficiency. Will not remove “set” from shear blade. simple to operate that anyone can use it and turn out a professional job in a few minutes.
10 And the tenth reason is it is so
79
Auto & Marine
Model #1 For sharpening shears up to 14” overall
SHEARS
“UNIVERSAL” SHEAR SHARPENERS PARTS LIST
Auto & Marine
Parts Name Coarse stone Medium stone Fine stone Extra handle assembly with coarse stone and fine stone Extra handle assembly with medium stone and fine stone Extra handle assembly with coarse stone and medium stone Extra handle assembly with medium stone and medium file Extra handle assembly with coarse stone and medium file Extra handle assembly with coarse file and medium file Extra handle assembly with medium stone and corrugating file Stone holder Ball post Solid vise jaw Moveable vise jaw Rear rod — tail piece Hi-rise attachment (for knife edge blades)
80
SHEARS, HERITAGE
SHR 720 Safety Tip – 9″
Large ring handle for fast powerful cutting of layered material. High leverage bent pattern.
SHR718 – 81⁄ 4 ″
Knife Edge Bent Trimmer
SHR210K – 10″ SHR212K – 12″
Keyston/Scissor Hand
SHR9XS45 – 9″
Handles conform to shape of hand with space for all fingers. Four times the torque, self-opening, replaceable spring. Reduces cumulative trauma injury.
Knife Edge Bent Trimmer
SHR208K – 8″
Thread Clip
SHRHTC-5 – 41⁄ 2″
Self-opening handle with spring action for quick, easy cutting. Ball bearing construction reduces friction.
Heavy Duty Knife Edge Bent Trimmer
with Padded Handle for added comfort SHR211H – 111 ⁄ 4″
81
Auto & Marine
Industrial Shear
SHEARS, WISS
Inlaid Bent Trimmer
#20—101⁄ 4″ (43⁄ 4 ″) #22—121⁄ 4″ (61⁄ 8 ″)
With Padded Handle: #20P, #22P
Pinking Shears
#AA—105⁄ 8 ″ (37 ⁄ 8″)
Hot drop forged. Professional industrial model. Large teeth, nickel-plated blades, black handles. Tension ball adjustment.
Shears are measured from tip point to handle end for total length. The smaller number is the cutting length inside the blade.
Quick-clip Speed Cutters
#1570B—43 ⁄ 4 ″ (1″)
82
SILICONE
SILICONE
100% Silicone Sealant
Protect and seal with 100% silicone rubber. Waterproof, weatherproof, won’t crack, crumble or dry out. Meets Fed. Spec. TT-S-001543A, Class A. Meets requirements of FDA Regulation #21 CFR 177.2600 and CID-A-A-272, Type IV. SIL686 SIL684 SIL8641 SIL8642 SIL8646 2.8 fl.oz. 2.8 fl.oz. 10.3 fl.oz. 10.3 fl.oz. 10.3 fl.oz. Black White Clear Black White
ALL PURPOSE SILICONE #4221
Great for lubricating cutting tables, sewing machines, rubber products, skates, bicycles, locks, tools, machinery, wheels, etc. It stops squeaks on car doors, hinges, windows, drawers, doors, locks, latches, etc. It even stops and prevents rust on tools, garden equipment, sporting goods, guns, etc., and Keyston silicone stays on longer. 11 oz. can 12 per case
SILICONE SPRAY #SIL945
Speeds cutting and sewing. Eliminates material drag. Stops bunching and binding. Speeds fabric flow. Non-staining. Dries instantly. 11oz. can 12 per case
83
Auto & Marine
SPEAKER CLOTH, COVER, HEAT SHIELD
SPEAKER GRILL CLOTH
100% polyester – 68″ wide 90 yards per roll 6.25 oz. per linear yard Available in 13 colors
DYNAMAT SIMPLY SOLVES COMPLEX PROBLEMS
Dynamat is the revolutionary noise reduction material that actually absorbs the dynamic motion or vibration of any solid substrate. This is known as Structure-Borne Resonance. Dynamat controls this resonance by transforming the vibrational energy of any given panel into a negligible low grade heat, thereby reducing or even eliminating unwanted noise and vibration. Every cellular phone user has experienced road noise problems. With Dynamat, the ambient noise level is significantly reduced. This allows the user to speak more comfortably, be better understood, and it allows them to hear the other voice much better. This makes the cellular phone a more convenient and valuable means of communication for your vehicle.
Auto & Marine
Encore Speaker Cover
72″ wide – 50 yards per roll
• 100% solution-dyed • Easy to cut, fit and mold to • Resists mold, mildew, stains • • • •
shape and soiling Will not ravel or fray Ideal for music industry as enclosure covering Excellent as compartment liner for the RV and Marine industry Stocked in black, charcoal, rock, blue/black, red/black, green/ black, light grey polypropylene fiber
ELASTIC MOLDABILITY ™
QUIET INSTALLED. SIMPLE CONCEPT, EFFECTIVE RESULTS.
Everyone appreciates a smooth, quiet, “luxury car” ride. By installing Dynamat in any vehicle, you can enjoy an increase in ride quality and a decrease in noise levels. All Dynamat materials are thin, flexible and self-adhesive so they are easily installed to your interior sheet metal or plastic panels (floor pan, firewall, door panels, trunk, roof or any resonant prone panel). This will dramatically reduce noise generated by the road, engine, drive train and suspension impacts. Your vehicle will take on a solid feel of quality.
Dynamat is extremely flexible and can adapt to most any surface contour. This keeps the material in constant contact with the vibrating substrate and is key to a well-damped panel.
HEAT SHIELD
• Superior sound deflector • Excellent heat barrier • Can be cut with scissors or • • • • •
SOUND SOLUTIONS AUDIO/ VIDEO ISOLATION
Now it is possible to stop room-toroom noise and isolate in-wall speakers. Dyna-Ply is a unique material, formulated to be used between two layers of wallboard, thus reducing sound transmission. Also, Dynaliner and Dynaliner Max provide sound absorption and attenuation for a variety of architectural and vehicle acoustical problems.
knife Can be handled without gloves Minimizes vibration Lightweight and drapable Passes MVSS-302 Contains no irritants or carcinogens
Foil one side: • pre-packaged size 48″ x 72″ • or 48″ wide x 25 yard roll Foil two sides: • 48″ wide x 25 yard roll
STOP ROAD NOISE
Dynamat improves any car audio system by giving you greater dynamic range, improving speaker response and effective amplifier power. You will now hear subtle music passages that may have gone undetected before. Think of Dynamat as the foundation to any sound system installation.
DYNAMAT
The Original
DYN6211 .070″ x 19.5″ x 32.5″
DYN6211A .070″ x 32.5″ x 58″
84
SPRINGS
LADDER SPRINGS
Auto & Marine
To repair truck cushion bases. Can be cut down for bucket seats. Use with or without helical springs.
SPR11 SPR155 SPR165 SPR2BH SPR3BH SPR4BH SPR315 SPRJ3 SPRJ275 15″ x 50″ 151⁄ 2″ x 50″ 161⁄ 2″ x 52″ 2″ 3″ 4″ 3″ 3″ 23⁄ 4″ “Ladder” Springs GMC “Ladder” Springs Ford “Ladder” Springs Back Helical Spring Back Helical Spring Back Helical Spring Helical Spring Helical spring Helical spring 15 gauge
GENERAL INSTRUCTIONS
Most assemblies will be made with helical springs on back rail only (Fig.1), but helicals can be applied on both front and back rails, or to side rails if desired (Fig.2). Always place in position with end knot pointing down (Fig.3).
NYLON THREAD & BOBBINS
Size 69, 16 oz. and 8 oz. spools Available in a variety of colors Ready wound bobbins available in sizes ‘G’ and ‘M’ Inquire about color selection
#18 NYLON HAND STITCHING THREAD
Pre-stretched and waxed. There isn’t a better nylon thread anywhere. Put up on 2oz. tubes, 8 tubes to a box. Assorted colors.
MONOFILAMENT NYLON BOBBINS CLEAR
New plastic bobbins prewound with monofilament thread to save time and money in your sewing operation. All styles packed 50 bobbins per box.
NYLON MONOFILAMENT
Sizes 40 and 52 approximately 1.5 # per canister
86
Style G:
Singer 111W, 211W Consew 225, 226, 256 Pfaff 145
#40 — .009 diameter #52 — .010 diameter
THREAD & BOBBINS
PREPARE TO MEET YOUR MATCH
COATS AMERICAN
POLYESTER THREAD AND BOBBINS
Polyester thread is suited to any exposure to weather and sunlight. The Weather Beater – For convertible tops, awnings, tarps, sails, tents, covers for pools, trucks, boats, campers and industrial sewing for most repair work. Virtually impervious to moisture, heat and ultraviolet rays. 4 oz. Spools – DB92 Available in over 40 colors. Many colors formulated to match Sunbrella canvas. See color chart for selection.
16 oz. Spools – DB92 Black, White, Beaver ‘G’ D92 Style Bobbins (1 gross per box) Black, White, Beaver ‘M’ D92 Style Bobbins (1 gross per box) Black, White, Beaver 16 oz. Spools – D138 Black, White, Beaver ‘G’ D138 Style Bobbins (1 gross per box) Black, White, Beaver ‘M’ D138 Style Bobbins (1 gross per box) Black, White
SUNGUARD is available in 36 custom colors. It is rated one of the strongest, most durable threads on the market and can withstand the most severe weather conditions. SUNGUARD performs as well as it looks. Accept no substitute. Insist on SUNGUARD for superior results. Size D92 All colors available in 4 oz. and 8 oz. spools. Most popular colors available in 16 oz. spools. Most popular colors available in size ‘G’ and ‘M’ bobbins. Size D138 Available in selected colors in 16 oz. spools and ‘G’ and ‘M’ bobbins.
“HIGH SPEC”
Bonded Nylon Thread B69
Available in 4 oz., 8 oz. and 16 oz. spools. Some colors available in Style ‘G’ Bobbins. 36 colors from which to choose. Old Style # 12 16 24 New Style # 138 92 69
87
Auto & Marine
“SUNGUARD” UVR bonded polyester thread looks better because it matches the fabric perfectly. No other thread offers consistently perfect matches for Sunbrella® fabrics.
TONNEAU MATERIAL & ACCESSORIES
CHROME PLATED BOW SOCKETS
Auto & Marine
WOODEN BOWS
Durable Polyester Vinyl Truck Bed Cover Fabric
For truck beds and boats. Available in 72″ lengths.
MH6OT BED COVER RAIL
Extra wide 78″/198cm for full size trucks without a seam.
Care Instructions for Maximum Performance:
• Cover must be secured at all points when vehicle is
Truck bed cover rail, mill finished. Available in 64″ lengths.
• An unsecured cover will “wind-whip,” resulting in • Do not overload cargo. Protrusions in the cover will
damage to the vinyl fabric. stress fabric.
in motion.
BEADED WELT INSERT
• Covers removed completely in temperatures below
freezing will be difficult to resecure. Available:
Used in conjunction with our Tonneau Cover Rails. TW100 – Black. TW900 – White Unit Package 100′ per coil
Elk grain: Acrylic: Prairie Grain:
Black only Black only Black, Red, Bright White, Indigo Blue, Cream White, Slate, Storm Gray, Sand, Medium Neutral
Tonneau Binding:
ALUMINUM TONNEAU BOWS
67″ pre-bent tonneau bows. 1″ diameter, .055 wall, can be cut to fit any pickup, full size or mini. Each bow supplied with two black nylon plastic bow insert ends and two nylon plastic bow sockets. Bow ends snap and lock into brackets.
1 1⁄ 4″ single fold, Prairie grain. Available in all Prairie Grain colors. 25 yards per roll.
88
TOOLS – ADHESIVE BINKS
GUNS & ACCESSORIES
Specifications:
2001 Air Spray Gun
Incorporates the best features of our most popular heavy-duty production guns. Utilizes new fluid style nozzle with 6 air passages. Large selection of nozzles available, enabling you to spray all conventional coatings including the new high solids. Forged brass head, anodized forged aluminum alloy body. Air hose connection 1⁄4 NPS(m), fluid hose connection 3⁄8 NPS(m). Weight: 24 oz. Ref. Part Sheet 2316.
• • • • • • •
⁄ 8″ NPS (M) fluid hose connection Hardened steel internal mix air nozzle Plated brass external mix air nozzle 1 ⁄ 4″ NPS (M) air hose connection Hardened steel fluid nozzle Floating type needle valve Nylon tip cartridge type air valve
3
External Mix Nozzles:
External Mix Air Nozzles accomplish fluid atomization by mixing air and fluid outside the air nozzle by the action of air jets. This type of nozzle may be used with all types of fluids; it is ideally suited for fine finishes and production work. There are two ways of operating an external mix air nozzle: siphon for light-bodied fluids, and pressure to lightto-heavy-bodied fluids. Several sizes of external mix nozzle combinations are available; their selection is determined by the amount of air supplied by your compressor. The spray pattern is adjustable from round to fan.
BINKS SPRAY UNIT
Model 83C pressure tanks are designed as a pressure container to supply liquid material at a constant present pressure up to a maximum of 80 PSI. All models include a polyethylene liner and are for lightto-medium duty use only. 83C-220 Dual regulation (air and fluid)
AIR & FLUID HOSES
JGA SPRAY GUN
Setting industry standards for high-production performance, the JGA gun is an economical option for waterborne and solven-based material applications. Constructed of drop forged aluminum with 300-grade stainless steel fluid passages for waterborne compatibility. JGA510
Available in 10′, 15′ and 25′ lengths with connections.
Rebuild Kits available for spray guns
89
Auto & Marine
BINKS MODEL 2001 SPRAY GUN
TOOLS, ADHESIVE
NYLON COILHOSE
This self-storing air hose stretches and recoils like a telephone cord!
For use with staplers, nailers, blow guns, dusting guns, riveters, belt sanders, disc sanders, air sanders, drills, nut setters, screwdrivers, hoists, chippers, moving air cylinders.
COILHOSE FILTERS F140
Ideal for any application because of its size range, two-stage filtration, cyclone separation, residual filtration and any application requiring up to 400 SCFM flow rates. Its corrosion resistant construction assures years of service. A 40 micron porous bronze element is supplied. TOL140BG
Auto & Marine
Construction Features
Designed to withstand working pressures up to 200 psi, this lightweight, permanently coiled hose is manufactured from tough, abrasion-resistant nylon and is supplied fully equipped with spring guards, tube inserts and standard compression fittings. Tube insert protects hose at fitting and eliminates possibility of loose fittings and restricted air flow caused by crushed hose at ferrule.
PSP412 PIGTAIL
TOL1414
Pigtail with Swivel Assembly
14
⁄ ″ x 12
Application Features
Self-Retracting. Recoils to a fraction of its full length to return tool to safe storing location. Protects tool from abuse and prolongs service life. Space Saver. No need for bulky hose reels and storing equipment. Provides better housekeeping by eliminating tangled hose problems, and hose cluttered work areas. Increased Efficiency. Lighter weight and ease of handling reduces operator fatigue and saves time and labor costs. One tool can now serve complete work area. Speeds up pneumatic tool handling. High Safety Factor. Eliminates hose dragging and danger of obstacles in work areas. Bright color is added safety factor. Versatile. Adaptable for horizontal or overhead installations. Available in a wide range of sizes and lengths to meet all requirements. Economical. Low initial cost – no need for expensive recoil mechanism. Allows greater range of tool use due to maximum extension ability. Nylon construction provides longer service life and resistance to oils, grease, corrosion and abrasion. TOL2514 TOL5014
14 14
AIR PRESSURE GAUGES
Convenient, standard gauges for accurate pressure reading. Can be used in any location or where conditions of vibration or rough service exist. Glass covered dials; painted, dust-proof cases; made from rust-resistant materials. TOL832727 100 lbs. pressure. Size: 2″ Bottom Outlet, 1⁄ 4″ NPT Thread
CRITTER SYPHON SPRAY GUN
Model 118
External Mix. Makes clean-up fast and easy (no liquid passes through internal passages). Pinpoint Control. Means accuracy and no overspray. Simple to Operate. Works on all air systems. Easy to operate – screw nozzle up or down for desired liquid control. Produces a circular, cone shaped pattern with pinpoint control, no overspray. TOL118K
⁄ ″ I.D. Hose x 25 feet ⁄ ″ I.D. Hose x 50 feet
14 14
⁄ ″ NPT fittings ⁄ ″ NPT fittings
90
TOOLS, ADHESIVE
EZE SPRAY GUN #TOLEZE
PRO-90 HOT MELT GLUE GUN
Uses 1/2″ diameter Glue Sticks
The Pro-90 uses a state-ofthe-art PTC heating system for accurate temperature control. Its simple, compact design is perfect for small applications where precise adhesive placement is required. It is ready to use in under 4 minutes. It offers great performance for a fraction of the price you would expect to pay for such a reliable handgun. Electrical Requirements: Power: Operating Temperature: Weight: Continuous Adhesive: Output: 120VAC HT 60 watts; PTC type LT 50 watts; PTC type HT 380° F; LT 250° F 10 ounces HT 2.2 lbs per hour LT 1.6 lbs. per hour
• • • • •
Holds 16 ounces Operates on 65 pounds of pressure and up Spray thin or thick liquids (including adhesives) Lightweight aluminum body (will not break under normal use) Tough polyethylene container (not glass)
EZE to handle, lightweight, durable. EZE to clean. Loosen adjustment nut and slide vacuum tube completely out. Dip vacuum tube in solvent and blow out with spray gun. EZE to adjust. Loosen adjustment nut and slide vacuum tube up or down until desired spray pattern is achieved.
TOOLS, HAND
TUCKING TOOL
Osborne #747 – Rigid
For tucking headlining and upholstery around windows and above doors and other hard to reach places. A sturdy tough tool with a slightly curved blade that has finished edges and rounded corners. Comfortable wood handle with eyelet hole through one end. Weight 4 oz.
REVOLVING PUNCH
For professional and industrial use
Auto & Marine
Osborne #155
6-tube punch with tubes 1, 2, 3, 4, 5, 6. This punch has been known for many years as the best Revolving Punch ever made. The frame is made of forged steel, highly polished. The cutting tubes are hand turned from high carbon tool steel and threaded to allow easy replacement. These tubes are individually tempered. Length of punch: 81⁄ 2 inches. Tube Sizes for #155: 1 ⁄ ″ 2 ⁄ ″ 3 ⁄ ″ 4 ⁄ ″ 5 ⁄ ″ 6 ⁄ ″
Osborne #746 – Flexible
Same as above but with flexible spring steel blade. A very popular tool. Weight 4 oz.
HOG RING PLIERS WITH VINYL HANDLES
3 32
7 64
18
5 32
11 64
3 16
Anvil also available.
REVOLVING PUNCH
Osborne #1440
9 different styles with straight or angled handles, some with opening springs, some with closing springs, others with no springs. Please specify style – grooves are the proper depth. Made of forged steel. #1440-A — Straight handles 6 3⁄ 4 ″ long #1440-B — Handles bent at 135° angle to jaw #1440-C — Handles bent to reach difficult spots Jaws and handles are aligned
Osborne #223
A fine quality inexpensive pressed frame revolving punch with drive tubes. All tubes are heat treated to give long wear. Fully nickel plated. Length of punch: 8 inches. Furnished with tube sizes 1, 2, 3, 4, 5, 6. Packed one in a display pouch. Weight each 9 oz. Tube Sizes for #223: 1
5 64
2
3 32
3
7 64
4
18
5
5 32
6
3 16
⁄ ″
⁄ ″
⁄ ″
⁄ ″
⁄ ″
⁄ ″
92
TOOLS, HAND
SQUARE POINT KNIFE
Osborne #76.5
Trimmers’ and upholsterers’ knife. White handle. Pinned blade measures 5 ⁄ 8 ″ wide by 37 ⁄ 8 ″ long.
AUTO TRIMMERS’ AND UPHOLSTERERS’ COMBINATION KNIFE
CUTTING PAD
Osborne #1020
Made of finest steel with both hook and pointed blade. Used for ripping seams. Cuts auto carpeting, vinyl, plastic and rubber. Beechwood handle is contoured to fit hand. A handy professional tool.
Osborne #603
Made of resilient vinyl plastic, these tough cutting pads are ideal for use with arch punches or belt punches. They are long-wearing and can be used on both sides. Cutting pads must be used on a solid base for best results. Size: 10″ x 10″ x 1⁄ 2″
INTRODUCING OUR NEW FILLER BAZOOKA
MINI-PUNCH SET
Osborne #302
Save time and money with this high performance jet stream. Now fill cushions, pillows, pillow backs, mattresses, mattress pads and much more the easy way. Turn a tedious job into a simple one by placing the back end of the Bazooka just above the loose filler container and the front end into the item to be filled. In seconds, the Bazooka literally sucks the loose filler into the sleeve being filled, saving approximately 98% of the mess and waste. It’s also a vacuum cleaner.
Osborne #K-157
A special set for cutting small precise holes in soft materials. Set consists of a round handle with slot in side to clear punchings and 7 replaceable tubes. Handle is threaded to accommodate screw tubes in sizes shown below: 0
5 64
• • • •
Can be used with down, kapok, shredded foam, styrofoam pellets and other loose materials. Bright, lightweight aluminum – 28″ length, 2″ outside diameter. Operates on 60 to 90 pounds of pressure. Completely assembled and ready for immediate use.
1
3 32
2
7 64
3
18
4
5 32
5
11 64
6
3 16
⁄ ″
⁄ ″
⁄ ″
⁄ ″
⁄ ″
⁄ ″
⁄ ″
93
Auto & Marine
TOOLS, HAND
BRONZE MAGNETIC HAMMER SOLID HEAD FANCY NAIL HAMMER WITH NYLON TIP
Auto & Marine
Osborne #33
Solid head of bright bronze. Steel tipped at one end for permanent magnet and at the other for hammering. Balanced design, shellacked hardwood handle. Head weight: 7 oz. Head length: 5 1⁄ 2″
Osborne #36
This hammer is similar to our popular #33 bronze magnetic hammer but the large face is fitted with a nylon tip, preventing damage to ornamental nails. The small face is magnetic. Head weight: 7 oz. Large face: 1⁄ 2 ″ dia. Head length: 5 1⁄ 2″ Magnetic face: 1 ⁄ 4″ dia.
BRONZE UPHOLSTERY HAMMER (Heavy)
MAGNETIC TACK HAMMERS
Osborne #39
This hammer is similar to our popular #33 magnetic hammer but a little heavier. Head weight: 9 oz. Large face: 1⁄ 2 ″ dia. Head length: 5 ⁄ ″ Magnetic face: ⁄ ″ dia.
12 5 16
Popular weights and sizes for window trimmers, upholsterers and household use. Forged from our special tool steel, carefully tempered. Fully polished head.
No. 238 Head Length Head Magnetic Weight Face 8 oz.
38
Overall Length 101 ⁄ 2 ″
Weight Each 12 oz.
4 3⁄ 8″
⁄ ″
RAWHIDE HAMMER (with split Head)
Osborne #395
Open – ready to replace worn faces Ideal for use with arch punches, grommet dies and wherever a cushioned blow is desired. No trouble to replace faces. Just loosen the safety nut, remove worn face, insert replacement, and tighten. Size 2 Closed – ready to use 395-2F Face diameter: 21 ⁄ 2″ Weight: 1 5⁄ 8″ lbs. (Replacement Faces/pair)
94
TOOLS, HAND
BLACK RUBBER MALLET DUCKBILL PLIERS
Osborne #197
The #197 black rubber mallet can be used on all parts of a car without fear of marring metal parts. Head of solid rubber with hickory handle.
Size 3 Face Diam. Head Length Handle Length 11″ Weight Each 28 oz.
Osborne #DBI (Mount #DBI)
Made of malleable iron. Jaw width extra wide. Special small finger crook. Nickel plated, popular style. Overall length: 7″ Jaw width: 7⁄ 8″
2 1⁄ 2″
4 1⁄ 2″
DUCKBILL PLIERS RAWHIDE MALLET with Solid Head
Osborne #98 Osborne #196
The head of this lightweight mallet is made entirely of rolled rawhide. Handle is white hickory. Recommended for many jobs where the user wishes to avoid scarring. Made in England. Size 4 Diam. 2″ Length 3 1⁄ 2″ Weight 10 oz. Finest professional quality, these pliers are drop-forged from high carbon steel. The jaws are hardened and tempered and carefully polished. They are an ideal plier for stretching material in tight places where space is too limited for using the ordinary stretching plier. Overall length: 61⁄ 2″ Jaw width: 1⁄ 2″
WEBBING OR LEATHER PLIER WHITE RUBBER MALLET
Osborne #396
The #396 extra heavy white rubber mallet will not mar surfaces. Superior quality. Finest on the market. Limited bounce.
Size Face Diam. Head Length Handle Length Weight Each
Osborne #250
The #250 plier is made with hammer jaw; the hammer acts as a lever if a strong pull is required. This is an excellent tool for stretching leather and canvas as well as webbing. It can also be used as a hammer. Length 8 3⁄ 4″ Width of Jaw 3 1⁄ 2″ Weight Each 1 lb. 2 oz.
2
1 7⁄ 8″
3 1⁄ 4″
10″
12 oz.
95
Auto & Marine
TOOLS, HAND
QUICK NAILER
Fancy Nail Spacer for Spacing Antique Nails Osborne #777
Set up to 5 nails head-to-head at one time without damaging the furniture or your fingers. Exact spacing at the same time! Load large end of tool, making sure nails are perpendicular to and shanks are flush with base of tool. Position tunneled section of tool over last nail driven and begin setting nail. Removal of tool may require twisting motion and/or pressure against nail heads with free hand. Use Osborne #36 Nylon tip hammer.
Auto & Marine
SELF-CENTERING PUNCH SET
Osborne #K-156
This handy and versatile kit contains threaded handle with self-centering pointed plunger. This threaded handle will accommodate nine interchangeable threaded cutting tubes in sizes 1⁄ 4 ″, 5 ⁄ 16″, 3⁄ 8″, 7 ⁄ 16″, 1⁄ 2″, 5⁄ 8″, 3⁄ 4″, 7⁄ 8″ and 1″ diameter. The punches in this set will cleanly cut fabric, leather, rubber, paper, plastic and other soft materials. The selfcentering point makes these punches ideal for cutting holes in soft materials. These punches should be used on Osborne cutting pad #603. The use of an Osborne wooden or rawhide mallet is also recommended rather than a steel hammer. Packed one set per box; weight per box 21⁄ 4 pounds.
96
TOOLS, HAND
WEBBING STRETCHER (Rubber End) PIN REMOVER & PIN RESETTER For use with La-Z-Boy Chair
Osborne #95 (Patent Pending)
Osborne #255
Webbing stretcher is made of hardwood maple with corrugated rubber at one end and one row of 6 steel teeth at the other end. Width 33 ⁄ 8″ Length 71⁄ 2″
This unique tool does the complete job. Removes and resets. Permits easy access to retaining key pin. One shot in and out. No frantic spinning to find proper hole. It really works.
WIRE FORMER
GOOSENECK WEBBING STRETCHER
Osborne #253 (Patented)
A hand stretcher to catch the webbing close to the frame with plenty of leverage. Equally efficient for right or left hand. Extra sturdy construction.
Osborne #1963
The Osborne Wire Former is the tough tool that makes difficult wire repairs easy. You can quickly bend the ends of no sags, edgewise and form springs right on the spot, making offsets where you need them. Can be readily mounted in a vise for duplicating complex repetitive wire bends. Designed with heathardened steel to give long life.
VINYL ROOF, CARPET AND VENEER ROLLER
SPRING CLIP PLIERS Nickle Plated
Osborne #399-L
Used to roll on vinyl roofs – gets all the pockets out. Used on interior carpeting to smooth it out. This tool can also be used for veneer work in furniture. Handle length 9 ⁄ ″
12
Osborne #445-3
A special plier for three-prong setting spring or edge wire clips. A great time-saver.
97
Auto & Marine
TOOLS, HAND
BW CLIP PLIER SPRING BENDER
Auto & Marine
Osborne #522
New and improved, this sturdy quality tool is especially designed for rapid closing of 1 ⁄ 4 ″ cushion spring (two 8 gauge wire) clips. Contoured handle provides good grip.
Osborne #401-1″
LEVER SPRING STRETCHER
Spring bender, which is both simple in application and efficient in use. Nickel-plated ends are slotted to fit loops which can be bent with slight pressure or can be used to unbend previously made bends. This is precisely manufactured so that arcs, angles or curves can be properly made.
Osborne #268
This sturdy tool is used for heavy duty installations and is a safe method for installing sinuous type springs. Just set spring into rear frame clip and then pull spring into position from the front of the frame.
SPRING END FORMER
Crimps the End of Zig-Zag Springs and Open End Coil Springs
SPRING & WIRE CONNECTORS
Osborne #1776
For furniture and auto seat springs. Fixes broken seat springs and wires in minutes. Allen hollow head set screws in heavy tubing for maximum grip. Each set includes: six straight connectors, two 90° connectors, and two 45° connectors plus Allen key. Packed: One Set Weight per Set: 21⁄ 2 ounces
Osborne #404 (Patent Pending)
A tough tool to make work easy. Comes with three bolts and nuts. Bolt to corner of bench or on a 1″ block no more than 5″ from edge of bench. Can be used in a vise. Drill 5 ⁄ 16″ holes 13⁄ 4″ apart. Packed: One Each 98 Weight 11⁄ 4 lbs.
TOOLS, HAND
STAPLE KNOCKER TACK & STAPLE REMOVER
Osborne #120 Staple knocker for removing staples and shredded material. Manufactured from top grade steel. Electronically hardened working ends. Eash to grip plastic handle. Used with Osborne hickory or rawhide mallets.
Osborne #121 This staple and tack remover is constructed with the same honest cranfsmanship that goes into all Osborne tools. Can also be used for grooving out drawers so that when reglued they will stick. Made of forged steel with wooden handle. Length overall 61⁄ 2″.
TACK CLAW with Plastic Handle
STAPLE LIFTER
Osborne #202 A good quality drop forged tack claw. Pointed ends are hardened and tempered to prevent breakage. This tack claw is like the #201 but with rugged plastic handle for heavier use and more leverage. Blade length: 21⁄ 2″ Overall length 73⁄ 4″
Osborne #1201 ⁄ 2 The correct angle for removing staples of any size, from the smallest to the long leg staples and shredded material. Manufactured from top grade steel. Electronically hardened working ends. Easy to grip plastic handle. Very popular model.
RIPPING TOOL with Plastic Handle
STAPLE REMOVER
Osborne #402 A beautifully finished tool with a translucent amber handle designed to fit the hand with perfect balance. Forged, highly polished steel blade with chisel edge. Shouldered tang to prevent driving into handle. Length: 83⁄ 4″ Edge width: 1⁄ 2″
Osborne #124 Forged from 4140 alloy tempered steel. Carefully hardened for lasting use.
99
Auto & Marine
TOOLS, HAND
KLINCH-IT TOOL #TOL01 BERRY’S STAPLE REMOVER
A top quality tool of heat-treated alloyed steel
Quick and easy to use. Klinch-It lowers your production cost and increases your production by speeding up one of the greatest time-consuming operations. It eliminates the slow, old-fashioned method of sewing springs to the web base. Instead, the springs are permanently fastened with sturdy steel clips. Easy-to-use instructions.
Auto & Marine
• • • •
This one tool removes staples of all sizes with a simple twist of the wrist. Unique patented action pulls staples quickly with maximum protection to upholstering materials. It is built for years of service — made of 4140 alloyed steel — heat treated. A must for every furniture manufacturer and upholsterer.
Klinch-It Fasteners #TOL02
Packed 5000 per box; weight of box 8 lbs., 12 oz.
You’ll wonder how you ever got along without it!
COMBINATION TOOL
HEAVY DUTY SCRATCH AWLS
Osborne #402.5
A beautifully finished tool with a translucent amber handle designed to fit the hand with perfect balance. Forged, highly polished steel blade. Shouldered tang to prevent driving into handle. Combined ripping tool and tack puller.
SEAM STRETCHER
Osborne #267
Made of lightweight aluminum. Simple toggle clamp construction, easy to operate. Minimum length 12″ for pillows; maximum length 3 ft. Rigid when in use. Can also be used as calipers for cutting large circles. No springs or chains. Easy to follow instructions on each package. Points easily replaced with points of #190. 3″ upholstery pins.
Osborne #4
Made in four sizes for your convenience. Best quality steel blades with rugged plastic handles. Size Blade Length 1 2 ⁄ 2″
1
CLIPS
Osborne #614
Special clips for Osborne #613.
PIPING TINS
(Patent Pending)
• • • • • • • •
No need to turn fabric to be tufted Every tufting done from above Avoids soiling that comes with repeated handling Always a straight seam Less effort – clasps automatically ejected Fewer stitches Tufts buttons easily Overall time-saving
Osborne #412–4
These 36-inch long piping tins are made of smooth aluminum. No burrs to catch on fabrics. The material is soft so tins can be bent to different sizes. Will form diameters of 2″ to 4″. Only a single pair is needed instead of a separate set for each size.
INTERMEDIATE UPHOLSTERY KIT
Osborne #B-11
This kit contains the basic tools and needles required for reupholstery work, but in it we have eliminated a few of the more expensive professional items in order to bring the cost down to a more popular level for use by schools or other institutions. It serves as an intermediate kit between our popular B-1 Upholstery Kit and the B-7 Pro Kit. The B-11 Kit contains one each of the following:
#33 Bronze Magnetic Hammer #253 Stretcher #201 Claw Tool #402 Ripping Chisel #761 ⁄ 2 Knife Instruction Book #5011 ⁄ 2 – 3″ #5011 ⁄ 2 – 4″ #5011 ⁄ 2 – 6″ #5021 ⁄ 2 – 4″ #504 – 8″ #520 – 8″ Needle Needle Needle Needle Needle Regulator
101
Auto & Marine
10 gauge furniture button tufter, two dozen clips free with each tufter. Thread twine in round hole in clip, hook square hole on needle and push, then withdraw needle. Directions included.
TOOLS, HAND
DIAGONAL CUTTING NIPPERS DIAGONAL CUTTING NIPPERS
Auto & Marine
Osborne #91
These rugged 73⁄ 8″ drop-forged nippers are ideal for cutting hog rings and wires. Polished head, black handles, finest industrial quality.
Osborne #3377
Solid, tough 7″ nippers for cutting hog rings or wire. Plastic grips.
HAND VENTILATOR SETTER
Osborne #621
(Patent Pending)
LUFKIN® 7132 SERIES FLAT WOOD RULES
TOL621075 For Setting 3⁄4″ Ventilators
1. Punch 9 ⁄ 16 hole in material (Osborne #149–9 ⁄ 16 ″ punch, on Vinyl #149–7⁄ 16 ″ punch). 2. Lay vent neck up on base. Place material over vent, slip vent ring on, bow side up. A few even taps with an Osborne mallet #196–4 will set vent.
Used extensively in shop, factory and textile industry as a bench rule. Easily read from either side of bench or table. Can be brought quickly to position on work, as measurements start at opposite ends. One-piece, selected hard maple, properly seasoned, smooth and well-finished; natural finish with clear protective coating. Hole in end for hanging. Bold markings embedded in wood below surface; black-filled for easy reading. Large graduations; marked both sides, both edges. One side, inches to eighths; other side inches to sixteenths. Brass end caps prevent wear. TOL7132 TOL7133 TOL7134 TOL7135 36″ x 11 ⁄ 2″ 48″ x 11 ⁄ 2″ 60″ x 11 ⁄ 2″ 72″ x 11 ⁄ 2″ x 1⁄ 4″ x 1⁄ 4″ x 1⁄ 4″ x 1⁄ 4″
TOL621100 For Setting 1″ Ventilators
1. Punch 3 ⁄ 14 hole in material (Osborne #149–3⁄ 4″ punch, on Vinyl #149–5⁄ 8″ punch). 2. Lay vent neck up on base. Place material over vent, slip vent ring on, bow side up. A few even taps with an Osborne mallet #196–4 will set vent. (For Ventilators see page 117)
UPHOLSTERER’S WOOD RULE
Osborne # 160
Manufactured from northern hard maple. Smooth finished in clear lacquer. Has 1⁄ 8 ″ calibrations. Sticks are 1⁄ 4″ thick x 13⁄ 4″ wide. Metal ends. TOL160-5C 60″ Length 12oz. Weight ea.
102
TOOLS, HAND
ALUMINUM STRAIGHT EDGE RULER ALUMINUM STRAIGHT EDGE RULER
• English measure • Flexible • Anodized aluminum construction
TOL36091 – 36″ x 2″ wide TOL36093 – 60″ x 2″ wide TOL36092 – 48″ x 2″ wide TOL36094 – 72″ x 2″ wide TOL36095 – 96″ x 2″ wide
HEADREST RELEASE KEYS
One edge for standard measurements, one edge for metric. Sturdy 1⁄ 8″ thick x 11⁄ 4″ wide – just right for marking selvage edge of cloth. Easy-to-read scales etched in black on silver background, one side only. Finish anodized for permanence. Centering scale on 60″. Hole punched in one end for storage. TOL80236 36″ TOL80260 60″
Osborne #K-752 Set of 4 Headrest Release Keys For use on most American Cars
Widths of blades: 1⁄ 4″, 5⁄ 16″, 1⁄ 2″, 3⁄ 4″ K-752 Headrest Keys may be purchased individually.
Removes Auveco #2288
DOOR HANDLE CLIP REMOVER
Osborne #758
TRIM PAD REMOVER
Osborne #760
Removes all plastic or nylon “Christmas tree” fasteners
MOULDING RELEASE KEY
Osborne #757
103
Auto & Marine
Osborne #802
TOOLS, HAND & POWER
SINGLE EDGE INDUSTRIAL BLADES
TOL9RZB .009 Regular Steel Back TOL12RZB .012 Heavy Duty Extra-Keen
DRILL BITS
Auto & Marine
Double-ended #30
Drill bit used specifically for 1⁄ 8″ Pop Rivets. Packaged 12 per vial.
#9 Regular – 100 per box #12 Heavy Duty – 100 per box Individually shelled 100s in tray carton
Works on standard 110 Volt outlet Comes with sample roll of film Works on almost any size or shape of cushion Packaged for UPS shipping Additional rolls of film may be ordered
As EZE as 1 — 2 — 3
Place cushion on top and drape with EZE Film.
CSF3300 CSF1650
Turn on machine and watch cushion shrink up to 75%.
Cushion Film Cushion Film 3300 ft. 2650 ft.
Slip cover over machine and turn machine off.
.0035 mil. .0035 mil.
104
TOOLS, POWER
ACU-CUTTER 350 FOAM CUTTER
Our fully assembled, lightweight foam cutters are built to last #TOL3508
Designed with economy and quality in mind, the AcuCutter 350 has dual blades, one moving, and handles many of the tasks more expensive models perform.
• • • • • •
3.2 amp motor Trimline design (half inch blades) 8-inch blade length Detachable foot plate Fully assembled and ready for use Patents pending
HEAVY DUTY – Fast, production cutting of all densities of foam rubber and flexible plastic foams. VERSATILE – Also cuts all carpeting including shag and foam-backed. SIMPLE – Quick blade changes – no tools needed. Blades available for 8″ or 12″ thickness. COMPACT – Motor housings are slim enough for the smallest hand, 21⁄ 4 ″ diameter, 91⁄ 4″ long. LIGHTWEIGHT – 3.5 lbs. without blades or guide. FAST – 3200 strokes per minute.
3
Supplied with MOTOR ONLY. ORDER blades, guide and footplate SEPARATELY.
1
2
3
MODEL 1575A
105
Auto & Marine
TOOLS, POWER
MILWAUKEE HEAT GUN MODEL 750 “EDDY” — THE ELECTRIC HEAT TOOL
The choice of most professional trimmers
Auto & Marine
Put the heat on tough jobs with Milwaukee
The leader in heat tools for over 59 years
General Description The Heat Gun 750 is a quality power tool. Like any power tool, it can be dangerous when misused. Read the following carefully and take all safety precautions. Specifications
For safe, instant, flameless heat…
• • • •
Lightweight – (23/4 lbs.) for extended periods of use with minimum operator fatigue A tough tool – built for rugged handling with GE LEXAN® housing and parts that are impact resistant and non-conductive Quick-change element – extends life and carries an exclusive 2-year limited warranty Variable heat control – ranges from 500° to 750° F
ENGLE HEAT CUTTER
• • • • • • • • •
120 Volts / 13A 750° F nominal Cord: 18 ga. 3 wire, 6′ long
• •
Contains no asbestos U.L. listed
Model HSG 0
This model is small enough to work with ease on any cutting table. The blade only takes 6 to 8 seconds to heat up and is controlled by the on/off action of the trigger switch. The cutting blade will handle acrylic fabrics like Sunbrella as well as synthetic rope and webbing up to 15 mm diameter. The guide will keep your table clear of burn marks and speed up cutting.
Uses Soften paint, caulking and putty for easier removal Soften adhesives to help remove stickers, floor tiles Bend plastic pipes Shrink tubing for electrical work Shrink plastic film for wrapping or weatherproofing Loosen rusted nuts, bolts and fittings
106
TOOLS, STEAMERS HIGH PRESSURE ELECTRIC STEAMERS
Hoffman/New Yorker TOLJ2
ELG Series
TOLELG4
For your auto trim and upholstery shop. Removes wrinkles and crush marks instantly. Use on seat covers, headliners, convertible tops — and a must for velvet, crushed velvet and mohair sofas and chairs. Portable, economical, versatile, efficient — with all these practical features:
Easy-to-Clean Heating Element • Extra wide “mouth” on J-2 heating element is easy to remove to clean out mineral deposits instead of replacing. • Cast-in heating element virtually impossible to burn out. • Cooler outer housing during operations. • Beveled edges for washerless fittings. • Seal threads to prevent leaks. • Solid brass elbows threaded for easy removal. • Back-up fusible link for safety. • Automatic thermostat. • High temperature, heavy gauge wiring. Shatterproof Water Bottle • One-gallon plastic water bottle is shatterproof for safety and to eliminate replacement; also lighter for easier handling and reduced shipping cost. New Steaming Head New 3-piece construction engineered to provide strong, trouble-free performance. Made from high-impact, high-temperature, glass-filled nylon for durability and cooler, safer operation. Contoured for the ultimate in comfort and to provide a full, steady flow of steam. Optional Aluminum Head Our original aluminum steam head with solid maple handle is still available as an option (standard on J4A model).
J-2 Standard TOLJ4
J-4 Specifications
J-4 & TOLJ4A
• • • • • • • •
• • • • • • •
Plug-in unit (see amperage rating 115 volt or 220/230 volts) Single on-off dial control Automatic operation Built-in accordance with the requirements of the ASME Boiler and Pressure Code On 4″ casters 10′ hose Manual gun and handle with 10″ brass wand
Cast aluminum housing Dual thermostats for steam in seconds after preheating 1500 watt incoloy heating element designed for more steam, longer life Heavy duty, color-coded wiring 3-position control switch 1500-W./120-V.A.C. (Optional 220-240-V.) Shipping weight 28 lbs.
Corrosion Proof Boiler Tank The boiler tank in the J-4 is constructed of #304 stainless steel, the same material as used in the nuclear industry and medical field. The deep drawn manufacturing process and characteristics of the material make the tank extremely strong so as not to rust, corrode or ozidize, to provide a lifetime of usage. The J-4 has a built-in sight gauge.
Available in black or white, ⁄ ″, ⁄ ″, 3⁄ 4″, 1, 11⁄ 2″, 2″; 25 yards per roll. A quality product at a modest price.
58
WOVEN NYLON HOOK & LOOP TAPES
Velcro USA Inc. offers two nylon woven hook tapes and a variety of loop tapes (both woven and knitted).
Auto & Marine
HOOK #88 AND LOOP #1000 SEW-ON OR ADHESIVE BACK (0114 OR 0172)
Available sizes: 1 ⁄ 2 ″, 5⁄ 8″, 3⁄ 4 ″, 1″, 11 ⁄ 2 ″, 2″, 4″ Standard colors: black, white, beige. Put-up: 25 yards per roll, each side.
Hook #65 Designed for maximum cycling (opening and closing). 6.5 mil nylon monofilament with over 400 hooks per square inch. Hook #88 Heavy duty hook tape somewhat lower cycle life than Hook #65. 8.0 mil nylon monofilament with over 300 hooks per square inch. Loop #1000 A napped tape used in most standard closure applications with both Hook #65 and #88. Loop #2000 An unnapped loop tape with a greater cycle life and less peel resistance than Loop #1000. Typically used where closure is to be effected around a radius (such as a strapping application).
“Napped” versus “Unnapped” Loop: Essentially, napped tape consists of woven nylon loops that are “randomly disoriented” in a separate operation after weaving. An unnapped tape is a woven nylon tape that is not napped.
Most Velcro® and Ultra-Mate® brand products are available with at least one of these four pressure-sensitive adhesives. DESCRIPTION A strong rubber-based, pressure-sensitive adhesive designed for applications with a temperature range from 0° F to 160° F. An aggressive, olefin-based pressure-sensitive adhesive designed for applications with a temperature operating range from 0° F to 120° F. An acrylic pressure-sensitive adhesive for superior bond strength with a temperature operating range of 0° F to 225° F. A water- and moisture-resistant acrylic pressuresensitive adhesive. Maintains a 2psi load at 200° F and a .5 psi load at 350° F with virtually no creep.
TEXACRO HOOK & LOOP FASTENER
34
⁄ ″, 1″ and 2″, black and white only.
VELCOINS
Pre-cut, circular Velcro Brand Hook #88 and Loop #1000 with 0172 adhesive. Stocked in 1⁄ 2″ and 3⁄ 4 ″ diameters, black or white. Available as special order: 3⁄ 8″, 5⁄ 8″, 7⁄ 8 ″, 13 ⁄ 8″ and 17⁄ 8 ″
12 34
⁄ ″ – 1400 coins/25 yd. roll ⁄ ″ – 1000 coins/25 yd. roll
VELCRO
Many other VELCRO Brand products are available, such as Ultra-Mate, Back-to-Back Fasteners, Fabricated Straps, Veltrack, Velstud, etc. VELCRO also offers flame-retardant tapes. A Certificate of Compliance is available upon request with each order.
Semi-rigid flat vinyl extrusions with a protective beading along both side edges. The face has a permanently attached Velcro Brand Hook or Loop. 1″ x 48″ long, black.
(0174)
108
VINYL
KEYSTON VINYL
You’ll find a complete line of transportation, contract, specialty vinyls and marine vinyls in stock for immediate delivery at every Keyston location. The Keyston vinyl line includes all of the most popular vinyl grains and colors. Whether you’re looking for a polyester napped or plain knit back on an expanded vinyl, you’ll find exactly what you need at Keyston.
109
Auto & Marine
WADDING, WELT TIPS, WIRE STAKE, SEAT HOOK
WADDING SEAT HOOK
#SC048
Extruded polyethylene, 11⁄ 8″ high, packed six 4-foot pieces to a tube. Weight 3 pounds.
Auto & Marine
#540 White Wadding
High quality cotton wadding is put up in a form that’s convenient for any kind of work where a smooth, soft flat-finished surface is desired. #540 White Wadding
• 40″ Wide • 60 Yard Rolls
WELT TIPS
#7181
Nickel plated brass Welt Tip ID: 11 ⁄ 16 ″ — 3⁄ 16″ height; 100/pkg Fits standard 5⁄ 8″ Hidem O.E.M. Seat Clip Part #SC-003 O.E.M. Seat Clip Part #SC-010
WIRE-ON MOLDING
#7185
Nickel plated brass Welt Tip ID: 9⁄ 16″ — 1 ⁄ 4 ″ height; 100/pkg Fits standard 5⁄ 8″ Wire-on
#7875
All convertibles Nickel plated brass Welt Tip ID: 5⁄ 8″ — 3⁄ 16 ″ height; 100/pkg
WIRE STAKE HIDEM WELT
Used to cover tacks on convertible tops and other upholstery areas.
5 ⁄ 8 ″ wide — 25 yard rolls Repp Grain Vinyl — Bison Grain Vinyl — Stayfast Cloth
#SWS16532
Kraft paper wrapped, 16 gauge. Oil tempered wire, for stabilizing no-sag springs, or can be used as border wire. 50 yard coils.
110
WINDLACE, WIRE-ON, SNAP-ON TRIM
ANTIQUE WINDLACE & WIRE-ON ALL PURPOSE CLOTH WINDLACE
Packed in 50 yard cartons. Packed in 50 yard cartons. 12 colors.
SNAP-ON TRIM
Packed in 50 yard cartons. Antique Grey and Antique Taupe only.
Standard
Grips 1 ⁄ 8 ″ to 3⁄ 16″ edge. Packed 100 ft. cartons. 12 colors
Jumbo
Grips 1 ⁄ 8 ″ to 5⁄ 32 ″ edge. Packed 80 ft. cartons. Black and white only.
SPONGE ROD UNI-GRIP
Style #500 3/8″ Sponge Rod
Packed in 50 yard or 800 yard cartons. Cloth-covered; packed in 20 yard cartons — 8 lbs each. #UG500 Black
Snap-On Trim Bulb Seal
(similar to Uni-Grip)
WEATHERSTRIPPING
1/2″ Sponge Rod
Packed in 30 yard, 50 yard or 500 yard cartons. Original equipment for ‘69–‘77 Maverick. 5 ⁄ 8 ″ Black Rubber Tube, 25′ Coils. ST-36A
111
Auto & Marine
ZIPPERS
CONTINUOUS CHAIN CONTINUOUS CHAIN SIZES & SLIDERS
#4 Aluminum Chain 7 ⁄ 16 ″ Natural Tape 100 & 250 yard spools #4 Brass Chain 7 ⁄ 16 ″ Natural Tape 100 & 250 yard spools #5 Aluminum Chain 7 ⁄ 16 ″ Natural Tape 100 yard spools #5 Brass Chain 7 ⁄ 16 ″ Black or Tan Tape 100 yard rolls #7 Brass Chain 3 ⁄ 4 ″ Black or Tan Tape 50 yard rolls Pinlock Aluminum Single Pull Sliders Pinlock Gilt Single Pull Sliders Pinlock Aluminum Single Pull Sliders Regular Locking Brass Slider Single Long Tab Brass Slider Brass Top Stops Brass Bottom Stops No Double Pull slides available
Auto & Marine
Put up on reels and can be cut with scissors to any desired length. Merely cut a length, slip on a slide, and sew to the cover. • Costs less — save 1/3 on standard length zippers for upholstered cushions. • Saves time through quick installation, easily sewn.
#7 BRASS ZIPPERS
YKK Continuous Aluminum Zipper Chain
YKK4AC100 4.5 7⁄ 16 ″ Natural Tape 100 mtr roll YKK4AC250 4.5 7⁄ 16 ″ Natural Tape 250 mtr roll YKK4AS 4.5 Aluminum Pinlock Sliders ⁄ ″ Tape Separating, Long Tab, Single Pull, Black Tape 24″, 36″, 48″, 60″, 72″
34
112
ZIPPERS
PASKAL #10 SEPARATING ZIPPERS
Marine grade, molded teeth, with polyester tape. These zippers are YKK compatible at a fraction of the cost. They come with double pull locking metal sliders in a variety of sizes.
SIZE STD.PKG
YKK MOLDED VISLON ZIPPER CHAIN
Especially designed for the marine and canvas industries. This zipper chain and our ready-made separating zippers are manufactured to resist both corrosion and damage from ultraviolet rays. The 100% polyester tape is unaffected by sun and sea water.
All available in Black or White
24″ 36″ 48″ 60″ 72″ 84″ 96″ 108″ 120″
50 25 25 25 25 10 10 10 10
SIZE
COLOR
ROLL SIZE
#5 #8 #10 #5 #5 #8 #8 #10 #10
Black or White Black or White Black or White Black or White Black or White Black or White Black or White Black or White Black or White
200 mtrs (218.72 yds) 125 mtrs (136.70 yds) 100 mtrs (109.36 yds) Single pull sliders Double pull sliders Single pull sliders Double pull sliders Single pull sliders Double pull sliders
YKK SEPARATING ZIPPERS
Both sizes available in Black or White with double pull locking sliders. YKK #10
SIZE STD.PKG
Black or White Black Black or White Black or White Black or White Black Black or White Black or White
200 mtrs (218.72 yds) 150 mtrs (164.04 yds) 100 mtrs (109.36 yds) Single pull sliders Double pull sliders Single pull sliders Single pull sliders Double pull sliders
ZIPPER STOPS
SIZE COLOR DESCRIPTION STD.PKG
#5 #5 #10 #10 #10
Black or White Black or White Black or White Black or White Stainless Steel
Top Stop Bottom Stop Top Stop Bottom Stop Top Stop
1000 1000 1000 1000 1000
113
Auto & Marine
BURLAP, CASTERS, CHIPBOARD, PADDING
ALL METAL CASTERS BRILLIANT BRASS
“MANHATTAN” Stem Type Fastener “MIAMI” Plate Type Fastener
BURLAP
21⁄2″ ⁄ ″ stem — 11⁄ 2″ long supplied with grip neck sockets.
5 16
21⁄2″ 11⁄ 2″ x 11⁄ 2″ square plate with four holes for #8 flat head wood screws.
Burlap is a cloth woven from jute yarn and is used on different parts of furniture such as covering arms, seats and back springs. 10 ounce – 40″ wide – rolled or flat fold. 100 to 130 yards per fold, 2,000 yards per bale. A 10 ounce burlap should weigh 10 ounces to the yard.
Recommended mobility load rating: 500 lbs — set of 4 Recommended static load rating: 1500 lbs — set of 4 Packing: 4 per set, 30 sets per case
Synthetic Burlap
40″ FLW natural cloth 125 yard roll #FLW40NAT
Furniture Supplies
COTTON FELT PADDING CHIPBOARD
A complete line of quality felted products of the highest quality, competitive in price and easily available at all of our locations. All rolls are 27″ wide, approximately 11⁄2″ thick, paper separated and double wrapped. Approximately 20 lbs per roll. Flame retardant treated available. Meets requirements of the State of California Bureau of Home Furnishings Bulletin 117.
114
26″ x 38″ Basis 50
Weight 50 pounds per Bundle .042 Caliper 50 sheets per Bundle
BUTTON TOOLS
DIES
Handy’s dies enjoy a well deserved reputation as the finest button covering dies available. After being precision machined from high grade steel, the dies are polished, nickel plated, tested, and polished again if necessary. We include actual button samples made with the dies you’ve purchased. No dies leave our factory until we’re sure that you’ll make only perfect covered buttons.
JUNIOR No.1 MACHINE
Covers 90 Buttons/Hour
Two-Piece Dies Use these die sets with our Junior No.1 Machine. Available in sizes 22 through 100 Light, Medium or Heavy, complete with short cutter.
Three-Piece Dies Use these die sets with our No. 2, 5A, 5PA and 7PA Machines. Available in sizes 22 through 80 Light, Medium or Heavy, complete with a long cutter.
This versatile, manually operated covering-cutting machine is our most popular model. Use it with Junior two-piece dies and a short cutter for peak production. A wood cutting block is included. Height: 22″ Weight: 13 lbs.
CUTTERS & CUTTING BOARDS
Covers 200 Buttons/Hour
Our sharp, hardened steel cutters are available to match all dies, sizes 22 through 100. Cutters may be resharpened.
This machine operates with Handy three-piece swivel dies that feed the shell and material into the top die semi-automatically. Height: 22″ Weight: 20 lbs.
115
Furniture Supplies
No.2 MACHINE
BUTTON TUFTER, TUFTING NEEDLES
“TIMESAVER” TUFTING NEEDLE
Osborne #417
The very best in the trade. Does not catch when it is withdrawn. After threading button, end of needle is loaded with clasps. As needle reaches maximum depth, clasp is rejected. Saves time and labor. No need to remove the outside back of piece being tufted. A splendid tool for the true craftsperson. Working process: 1) At the start assemble on thread the corresponding quantity of clasps for required number of stitches. Insert clasp with thread in the hollow of the needle. 2) Push needle (with inserted clasps and thread) through upholstery fabric, press head of needle. Clasp with thread will be ejected. 3) Pull needle out and tighten thread. Clasp will be anchored inside. #417 Needle: #418 Clasp: Weight per each 11⁄2 oz. Packed 500
CLASPS
Osborne #418
TUFTING NEEDLE
Furniture Supplies
PRONG BUTTON TUFTER
Osborne # 613–12″ Osborne #419
The Osborne #419 Prong Button Tufter accepts any length of prong with any size button. Tool is withdrawn after piercing fabric leaving the prongs extended through the fabric. This keeps the prongs from spreading while being put through the padding. Furniture button tufter #613–12″, 10 gauge, 2 dozen clips free with each tufter. Osborne quality needle. Thread twine in round hole in clip, hook square hole on needle and push, then withdraw needle. Directions are included.
CLIPS
Osborne #614
Special clips for Osborne #613.
116
BUTTONS, BUTTON MOLDS
HANDY VENTILATOR SINGLE & JOINED PIVOT
Handy pioneered the development and manufacture of ventilators for the Bedding Industry. Our perforated ventilators are of “one-piece construction” for added strength. The beveled under-edge fits smoothly and firmly to any ticking, plastic or fabric. Rigid inspection insures uniformity throughout. Handy ventilators roll easily and clinch permanently with or without washers. Hand attaching dies are available for either #1 or #2 ventilator. #1: 3 ⁄ 4″ Diameter on Top #2: 1″ Diameter on Top
ONE PIECE DURASNAP
The Joined Pivot female half comes with separate serrated tacks. Use it where a button is on one side of a cushion or to tailor skirts. For covered buttons on both sides of a cushion, use our Joined Pivot, supplied in pairs. The female half is assembled with a retaining pivot spring steel lock washer which mates with the serrated pivot tack of the male half. Easily snapped together, the buttons hold tight. The female half of the Joined Pivot or Single Pivot is available assembled with a steel shield for added safety. This prevents the tack from piercing the shell. 1 gross Box
This nylon back is specially designed to snap onto a Durable Wood Screw or Durable Stud when covered. Cover the DuraSnap the regular way, screw the stud into the upholstered panel, and snap the covered DuraSnap over it. The DuraSnap economically provides a secure hold with little chance of rust or discoloration. Sizes 30 and 36 1 gross and 5 gross Boxes
These assembled half-ball buttons are available in all standard sizes and either prong or wire eye backs. Please inquire for other special assemblies. Finishes: Brushed Brass, Bright Gold, Nickel Packaging: 1 gross and 5 gross Boxes
NYLON HOOK BACKS
Streamline your tufting operation, eliminate hand tying with Handy’s unique Nylon Hook Back. Pre-tied loops or Fastufts snap easily and securely into the patented dual-locking hook, and assure uniform tufting depth.
117
Furniture Supplies
FINISHED METAL BUTTONS
BUTTONS, DIES & MOLDS, NAILS & WASHERS
BUTTONS & LOOPS THREADED NAIL
Handy’s wire eyes are the choice of the industry for twine tufting. The #9 Standard has a heavy eye and will withstand an 80-pound pullout test. The #44 has a smaller eye and is intended to be used against delicate materials to minimize piercing and runs. All of our backs are zinc plated for rust resistance. Packaging: 1 gross, 5 gross and 25 gross boxes.
Size Diam.
9 16
When anchored with a spring lock washer, the Threaded Nail is a fast, positive, alternative to prong tufting. Just insert the nail through the upholstered construction and fasten it on the back with a #15 Spring Washer. 5 gross per box. Sizes 22 or 30: 7 ⁄ 8″, 11 ⁄ 2 ″, 2″ nail 1 gross and 5 gross Boxes
22 ⁄
24 5⁄ 8
30 3⁄ 4
36 7⁄ 8
40 1
45 11 ⁄ 8
50
60
11 ⁄ 4
11 ⁄ 2
SPECIAL DIES & MOLDS
For unusually light or heavy fabrics or for plastics
Frequently the cloth used is too thin or heavy for standard dies made for usual fabrics .025″ in thickness. Light fabrics, and plastics about .012″ require special dies for light materials. Heavy plastics and fabrics about .035″ thick and heavier also require special dies. We provide button covering molds for extreme materials such as “Shells for Plastic,” tempered softer to overcome cutting; “Extra Hard Shells” for very heavy cloths. Send samples of covering materials when ordering dies.
#15 ROUND SPRING WASHER
Furniture Supplies
Manufactured of high quality spring steel, this 15 ⁄ 16 ″ diameter washer provides a secure anchor for a tuft when locked on to a threaded nail. Its rounded edges eliminate any sharp corners. 1 gross and 5 gross Boxes.
PRONG BUTTONS
Prong button tufting is fast, economical and secure. It eliminates many twine tufting operations, and requires no special skills or button dies. The prong is anchored in place by bending the flatwire legs over a prong washer in the padded back. Available from most warehouses in 11⁄ 4″, 11 ⁄ 2″, 2″, 21⁄ 2 ″, 3″ prongs in sizes 22, 24, 30, 36 and 40. 1 gross and 5 gross boxes.
#1 Prong Washer
118
DECKING, DUST COVER
KEYSTON CUSTOM DECKING DECKING
Keyston Bros. carries a variety of deckings at discounted prices. Please contact your salesman or nearest branch for information
TICKING
Down-Proof Ticking
100% Cotton Natural 43″ and 67″ Wide
SKIRT LINING
Non-Woven
All sizes in White, 100 yard rolls. 5 1⁄ 4″, 6″, 6 1⁄ 2″, 7″, 8″, 12″
“Tailored by Craftsmen” Woven into the Decking
32″ Width Rayon 100 Yard Rolls Champagne Color
MUSLIN
Natural Muslin made of cotton for the upholsterer.
Cotton Muslin is a firm, closely woven and unbleached fabric used over all padded areas to hold padding in place and keep dirt from getting into padding. Carried in most warehouses.
DUST COVER
Accord ™ and Celestra
Black & White 1.25 oz. • 36″ Wide 100, 250, 500 yard rolls
• • • • •
• • • • • •
Grab and tensile strength allow forced feeding of shredded foam or fiber filling. Resists abrasion and pilling. Easily handles staples for a secure, neat appearance. Resists “poke through” damage during handling and transit. Whites are bright white; blacks are deep black; colors are warm and rich. Allows cushions to remain soft and comfortable, yet bounce back to original shape.
Air flows freely through bottom cloths while dust is filtered out. Provides a tight, firm, wrinklefree surface…no overstretching or sagging. Won’t crackle or rustle as a backing. Cushion wraps won’t snap or wheeze. Dust covers and bottom cloths will not rattle.
• • • • • •
Stitches hold fast. Handles easily, comfortably… not harmful to skin. Cuts smoothly, won’t ravel. Spunbonded polypropylene olefin. Meets flammability standard NF PA 701. Meets State of California flammability standards published in Technical Information Bulletin 117, Section E, Part 1.
Typar
Polypropylene Non-Woven Tough • Durable • Multipurpose 1.3 oz. • 36″ Wide • Black 500 yard rolls
119
Furniture Supplies
DOWN AND FEATHERS
The down and feathers used in our products are the natural byproduct of the food industry. Premium raw materials are purchased both domestically and internationally from companies that see such byproducts. Duck and geese are common food items in many countries of the world; our down and feathers are purchased primarily from these countries. Down and feathers are natural materials found on waterfowl. The down and feathers used in our products are from both ducks and geese. Down is the insulating undercoat that traps warm air next to the bird’s skin. Each down cluster is a spherical plumule of thousands of soft fibers radiating in all directions from a central point. The down plumule is threedimensional and does not contain a quill. Feathers cover the body of such waterfowl. Feathers contain a hollow quill shaft and stiff filaments radiating from the quill on a flat two-dimensional plane. Goose down plumules are generally larger, loftier and stronger than duck down. Good down may be labeled goose down, but duck is most often labeled simply down.
BULK DOWN
DWN8020GG DWN1090 DWN2575 80% Grey Goose Down, 20% Feathers 10% Grey Goose Down, 90% Feathers 25% Grey Goose Down, 75% Feathers 30# Bag 30# Bag 30# Bag
EDGE ROLL, FRAME, SPRING
EDGING 11⁄4″ CLIP-ON EDGE
Frame edging or spring edging. Body diameters 10⁄ 32″ through 1 1⁄ 2″. Generous tough spun-bonded lip for stapling or sewing. All synthetic filler. Clean and odor free. Lightweight, yet most durable.
12
Built-in positioning stakes spaced 11⁄ 2″ for hog-ring assembly to springs, or can be sewn on, or stapled on for hard edge designs. Odor free, all synthetic filler and tough spunbonded cover. 60 ft. coil 360 ft. coil EDG12550A EDG125360A
⁄″ ⁄″
50 ft. coil 1000 ft. coil 50 ft. coil 600 ft. coil 50 ft. coil 600 ft. coil 50 ft. coil 400 ft. coil
CELLUFLEX SPRING EDGE
Jute filler, burlap covered, 11⁄ 4″ diameter. 50 ft. coil 300 ft. coil EDG12550 EDG125300 All jute filler and burlap cover for resiliance and durability. Double-stitched filled lip for wedge shape. Uniform firmness. Full 11⁄ 2″ size. 50 ft. coil 300 ft. coil EDG12550J EDG125300J
121
Furniture Supplies
11⁄2″ JUTE FILLED SPRING EDGE
FLOOR GLIDES; FURNITURE COVERS, PLASTIC
PLASTIC UPHOLSTERY COVERS
Encourage Referrals Sparkling clean appearance makes lasting impression on your customers…they’ll tell their friends. Reduce Complaints Trouble-free delivery even in rain or snow…protect against soilage and water damage…eliminate costly service calls. Save Time & Money Quick and easy to use…costs only pennies.
To prevent rust and rust stains on carpets or tile, use Handy’s Plastic Glides. Both types are made of tough, high density polyethylene, perfectly formed and uniform. Sharp steel nails anchored in the glide base are easy to drive into the hardest woods. Domed glides are perfect for angled legs. For additional base height and strength, use the flat glide. Available in natural or beige. Flat Glides available as Special Order.
These glides are ideal for eliminating vibrations. A thick shock- and sound-absorbing cushion insulates and soaks up noise. Cold-rolled steel bases are nickel-plated and mirror finished. Our special design keeps the screw from turning in the cushion. RG100 Screw Series available as Special Order.
122
FURNITURE FABRICS
FURNITURE FABRICS
Keyston’s fabrics are designed to help you generate business. The line includes exciting fabrics offering you the latest in design, color, and fabric content for residential and contract furnishings. Whether you’re looking for contract fabrics for office and commercial jobs, or traditional looks for residential and hospitality applications, Keyston has the fabric for you.
CLEANING INSTRUCTIONS
In order to help you care for your new Keyston Fabric, we have adopted the National Association of Furniture Manufacturers standards of recommended cleaning methods which will best preserve the lasting beauty of your fabric. The coded instructions are as follows:
W: Clean this fabric with the foam only of a water-based cleaning agent to remove overall soil. Many household solvents are harmful to the color and life of the fabric. To prevent overall soil, frequent vacuuming or light brushing to remove dust and grime is recommended. Clean this fabric with pure solvents (petroleum distillate-based products, Energine, Carbona, Renuzit or similar products may be used). CAUTION: Use of water-based or detergent-based solvent cleaners may cause excessive shrinking. Water stains may become permanent and unable to be removed with solvent cleaning agents. Avoid products containing Carbon Tetrachloride as it is highly toxic. To prevent overall soil, frequent vacuuming or light brushing to remove dust and grime is recommended. S-W: Clean this fabric with the foam only of a water-based cleaning agent or with a pure solvent in a well-ventilated room (petroleum distillate-based products, Energine, Carbona, Renuzit or similar products may be used). X: Clean this fabric only by vacuuming or light brushing to prevent accumulation of dust or grime. Water-based foam or solvent-based cleaning agents of any kind may cause excessive shrinkage or fading.
Whenever a question exists as to the proper method to use, check with a professional furniture cleaning service. CAUTION: Never remove cushion covers for separate dry-cleaning or washing. Any tumble cleaning method can destroy the backing, shrink or otherwise damage upholstery fabrics.
#9940 Upholstery Scroll Gimp
36 yards per bolt; colors per color chart.
ENDURALATOR PADDING
RUBBERIZED HAIR
100% recycled man-made fibers, used for deck padding. Meets California State Technical Specification #117 for insulator filling. 2 ounces, approximately 28 yards per roll/20#.
Furniture Supplies
Sterilized curled hair, garnetted and impregnated with synthetic rubber latex. It is a resilient padding suitable for most upholstery applications, such as Tufted Backs, Arm Pads, and Decking Insulation. Goverment specifications can be met upon request.
DPE224 DPE236
24″ wide 36″ wide
DPE226
26″ wide
KAPOK
“Paratex” Rubberized Curled Hair & Fiber Pad with Net Backing
10% horse, 20% Tampico fiber, 70% hog hair Roll size 1″ x 24″ x 40′ Approximately 2.5 ounce/square foot Color: Green • Meets CSTS #117 Special pack for United Parcel delivery
Prime Kapok, machine picked and packed in bags of approximately 25 pounds. This is a silky fiber that does not absorb moisture and is used for throw pillows, camp mattresses and boat cushions.
124
LEGAL LABELS, LEGS
LWH3 — 3″ x 4″ WHITE
ALL NEW MATERIAL LINEN OR LINETTE
LGN3 — 3″ x 4″ GREEN
OWNER’S OWN MATERIAL LINEN
FURNITURE LEGS LEG25
Available length 21 ⁄ 2 ″
100 per Pack 100 per Pack Standard Fasteners available with counter bore.
LWH4 — 4″ x 4″ white
FLAMMABILITY
LWH24 — 2″ x 4″ white
NON-FLAMMABLE
BOLT-OUT
5 ⁄ 16 ″ x 18 x 1″ or 11 ⁄ 2″ bolt for use with T-Nuts
⁄ 16 ″ x 18 x 1⁄ 16 ″ bolt for use with metal plates
5
Also available as: LWH235 2″ x 31 ⁄ 2 ″
100 per Pack
Legnut T-Nuts
100 per Pack
ALL LABELS IMPRINTED WITH YOUR NAME AND ADDRESS IN ONE THOUSAND QUANTITIES.
TRIANGULAR LEG PLATE LPT1
For use with casters with screw bolt stems and legs with bolt-out fasteners. T002
5 16
⁄ ″ x 18 x 5 ⁄ 8″
RIBBON LABELS OF ALL TYPES ARE AVAILABLE ON A SPECIAL ORDER BASIS.
125
Furniture Supplies
COUNTER BORE
NAILS, NAIL STRIP
CONTINUOUS FRENCH NATURAL NAILHEAD TRIM WITH MATCHING NAILS
Speed Upholstering—Save Time—Cut Costs
#1132 French Natural Upholstery Nail (Steel)
12
⁄ ″ Steel Shank — 1000 per box. Use one 1132 Nail in each third nailhead.
11⁄ 4 Boxes of 1132 nails needed for each 50 yard roll of Nailhead Trim. Now it’s no longer necessary to have skilled personnel apply individual nails. Say goodbye to this time-consuming operation. More and more manufacturers are using our French Natural Nailhead Trim eliminating individual nailing. Even the unskilled can apply it easily, quickly and accurately.
• • • •
Continuous coil lengths make applications easier. Available in continuous rolls of 50 yards each, 20 rolls per carton. Automatically reduced labor costs from 50% to 80%. Guaranteed accurate spacing for uniform professional appearance.
NAILS
Imported Plated Steel Upholstery Nails (Made in West Germany)
Furniture Supplies
#9 Oxford Upholstery Nail (Steel)
Gold /Brass Finish ⁄ ″ Steel Shank 1000 per box 3 ⁄ 4 ″ Steel Shank 1000 per box
12
#9 French Natural Upholstery Nail (Steel)
⁄ ″ Steel Shank 1000 per box 3 ⁄ 4 ″ Steel Shank 1000 per box
12
#9 Plain Nickel
(Brite Silver finish)
12
#9 Plain Gilt
⁄ ″ Steel Shank 1000 per box
(Brite Gold finish)
12
⁄ ″ Steel Shank 1000 per box
Many other decorative styles available — special order
126
POLYESTER PADDING
POLYESTER FIBER
Bonded Polyester Fiber has remarkable properties
Bonded Polyester Fiber adds a new high standard of comfort, quality, inner luxury and beauty and low cost to both production line and custom furniture. • • • • • • • • The fiber is 100% chemically impregnated Non-allergenic Holds true dimensions Great resilience Lays up and cuts as easily as fabric Great tensile strength Cuts labor costs Custom quality and feel
PLAIN AND QUILTED
POLYESTER FIBER
Quilted Rolls
Fabric sewn to one side
Available in a variety of sizes
Shown below is a photo of a cut-away upholstered chair illustrating practical cost saving applications of various specifications of Bonded Polyester Fiber.
Loose Polyester Fiber
Available in a variety of sizes
POLYESTER PILLOW FORMS
Available in a variety of sizes.
⁄ oz. per square ft. ⁄ oz. per square ft. 1 oz. per square ft.
12 34
11⁄ 4 oz. per square ft. 11⁄ 2 oz. per square ft.
In widths from 24″ to 60″. Inquire at your local Keyston warehouse.
No-Sag is a spring made of special high carbon, high tensile steel formed and tempered into serpentine strands of circular shape. When uncoiled and anchored at the ends in the form of a shallow arc, they become springs with an accordion-like resiliency. They deflect a weight set on them, but always fight to regain their original circular shape. This permanent arc, known as the No-Sag arc, creates a spring support with strength and flexibility not otherwise obtainable. Introduced in 1934, No-Sag spring constructions have been widely adopted in the furniture industry and have set new standards in quality, durability and styling under the guidance of No-Sag engineers. No-Sag is used almost exclusively wherever comfort is scientifically engineered — in automobiles, airplanes, pullman cars, theater seats, etc.
#SPRB (21 ⁄ 2 ″ x 1⁄ 2″ x .093)
No-Sag Bands replace metal clips in serpentine spring construction. They silence serpentine springs and keep them in perfect alignment, maintaining the quality you build into your furniture. Spring link bands are made from Epcar, an ozone- and crack-resistant compound. Speedy application saves you time and money.
EK CLIP
#SPRCLPN
The universal four-hole EK Clip is used for back and seat construction.
Furniture Supplies
Use either one or two nails on the lip.
SS CLIP
#SPRCLP
Use the universal SS Clip with a staple gun for back and seat construction.
PLATFORM ROCKER SPRINGS
Standard size, high quality 8-gauge spring wire coils, held by sturdy ribbed brackets — designed for quality.
EK NAILS
NEK7813 NEK113
⁄ ″ long 1″ long
78
13 gauge 13 gauge
Cement coated
128
SPRINGS, EDGEWIRE
MARSHALL CUSHION UNITS
Hog Ring Connected, Covered
Seat Units SPR67WS SPR66BS SPR66SS SPR67SS SPR99SS Back Units SPR66BS 6x7 6x6 6x6 6x7 9x9 6x6 13 gauge 13 gauge 15 gauge 15 gauge 15 gauge 15 gauge wicker unit seat unit seat unit seat unit seat unit back unit 4″ high x 3″ diameter 4″ high x 3″ diameter 31⁄ 2″ high x 3″ diameter 31⁄ 2″ high x 3″ diameter 5″ high x 3″ diameter 5″ high x 3″ diameter
SLEEPER UNITS
#240048 Full Size #240046 Queen Size Baker Clips maintain a tight, foolproof grip – unlined. Center prongs separate wire and prevent edgewire from riding on top of coil.
EDGE SPRINGS
TORSION SPRINGS
SPR1065 61 ⁄ 2 ″ 10 gauge For stiffening corners and edges. Attached to border wire with BW clips or 5-prong edge clips.
SPR7ES SPR525ES
7″ 51 ⁄ 4 ″
12 gauge 12 gauge
129
Furniture Supplies
AUV7533
9 ga.
23⁄4″ long
100/box
STAINS
RESTOR-A-FINISH
Restore it – don’t strip it!
FEED-N-WAX
• • • •
Enhance the natural beauty and depth of grain in finished and unfinished wood Prevent drying and deterioration of all wood finishes Polish all wood surfaces to a soft luster and protect with coating of natural waxes Use to maintain the restored finish after using Restor-A-Finish 8 oz. Prevent Drying and Cracking Use Howard Feed-N-Wax to prevent drying and cracking while preserving wood finishes. Feed-N-Wax is a special blend of beeswax, carnauba wax and orange oil. Enhances the natural beauty and depth of grain in finished and unfinished wood, especially oak. 12 per case
• • • •
Eliminates white heat rings and water marks Blends out scratches and blemishes Restores color and luster to faded finishes Will not dissolve existing finish
How does it work? Restor-A-Finish is a unique finish-penetrating formula that restores original color and luster to your finish while blending out blemishes and minor scratches. It cleans the surface and restores the finish in one step – without removing any of the existing finish. Restore it – don’t strip it! With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a refinishing job can be completely restored in a few minutes. White heat rings and water marks, sun fade, oxidation, smoke damage, and most other blemishes can be quickly eliminated. Before you go to the extreme of stripping it, try restoring it! Restor-A-Finish is available in 9 colors: Neutral, MaplePine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown. 8 oz. cans 12 per case
HOWARD ORANGE OIL
• • • •
Cleans and polishes wood finishes with real orange oil Enhances the depth and natural beauty of wood grain Leaves no wax build-up, only the clean scent of oranges Contains no silicones or linseed oil 8 oz. 12 per case
Furniture Supplies
EASY ON
“The Quality Name in Professional Aerosols”
Natural 200 Series A combination of stain, sealer and lacquer. Used primarily on a new wood or where the grain should be visible. Also available
300 Clear Flat 301 Satin Clear Flat 302 Ultra Flat Clear 303 Gloss Clear 304 Shellac 305 Flat Oil Finish 306 Sanding Sealer 307 Lacquer Leveler 401 Gloss Black 402 Ebony Black 403 Natural White 409 Flat White 601 Satin Polyurethane 602 High Gloss Polyurethane 12 per case
Wood Stain 100 Series A combination of pigment, light resistant stains, sealer and lacquer. Will cover any scratched or marred surface.
EO101 EO102 EO103 EO104 EO105 EO106 EO107 EO108 EO109 EO110 EO111 EO112 True Mahogany Rock Maple True Walnut Cordovan Mahogany French Walnut Shadow Walnut Creamy Blonde Deep Walnut Sandy Fruitwood Brown Mahogany Butternut Blonde Nutmeg 12 oz. can EO113 EO114 EO115 EO116 EO117 EO118 EO119 EO201 EO202 EO203 EO204 EO205 Light Fruitwood American Walnut Raw Umber Burnt Umber True Maple Provincial Maple Medium Walnut Natural Walnut Natural Mahogany Natural Maple Natural Blonde Natural Oak
12 oz. can
12 per case
130
STAPLE GUNS, AIR
AIR TACKERS
FASCO or RAINCO Features:
SPOTNAIL Features:
• • • • •
Lightweight Long life driver and bumper 1″ nose for better visibility Rear exhaust Easy jam clearance
• • • •
Bottom load Lightweight Rear exhaust Plastic carry case
FASCO Model FGS3G – Int. Crown (3⁄ 8″) Uses: Senco G3 series, Bea 71 and Empire 7 series
SPOTNAIL Model BS7118 – 3⁄ 8″ Crown Uses Spotnail 71, Bea 71, Senco G3, Empire 7 series Model BS5018 – 1⁄ 2″ Crown Uses Duo-Fast style 50 series
STAPLE GUNS, ELECTRIC; STAPLES
DUO-FAST ELECTRIC STAPLERS
• • • • • • • •
Shorter tool height increases maneuverability. Longer electrical cord reaches most power outlets without requiring an extension cord. What a convenience when you’re busy! Powerful and super fast (up to 250 staples a minute). New nose assembly design features few parts, making the Duo-Fast stapler more reliable. Your trusty tool is ready to go to work when you are. New drive system increases drive force by 10%. Allows you to staple it down in the first try every time. Reduced number of parts simplifies service, increases tool life. You get more work out of your Duo-Fast tool. Improved fuseless power pack design safeguards tool from electrical power surges. Redesigned cap assembly, held in place by 4 screws, reduces the risk of breakage, making the tool much sturdier.
STA3118A Electric Stapler
Uses 3100 series staples, 3 ⁄ 8 ″ wide crown.
STAPLES
Keyston Bros. stocks a wide variety of staples for the different styles of air tackers, hand staplers, and electric tackers. Duo-Fast 5000, 3100, 3300 series Import Duo-Fast style 5000 series Import #7 S3G series Spotnail 71 and 5000 series Bea 71 series Selected styles and sizes are available in stainless steel for marine and outdoor applications.
REGITAR ELECTRIC TACKERS
#RE7014
9 AMPS, 110 Volt, 50/60 HZ. Uses any S3G staples. Medium Crown.
132
STAPLERS, HAND
702 CLIPPER PLIER STAPLER DUO-FAST HAND TACKER
STA700AHP
Features: All steel construction, chrome finish, 25⁄ 8″ throat depth. Uses undulated staples for greater holding power or standard office staples. STA70014
14
STA126HP
All steel construction – beautifully finished. Two-way anvil for pinning and stapling. Easy to load. Uses 24/6—1⁄ 4″ and 24/8—5⁄ 16″ staples in strips of 160 staples. 21⁄ 4″ throat allows for deep stapling. Full 3⁄ 8″ open throat. Perfect mechanical action. Fastens in any position. Using 1⁄ 4″ staples, this plier is ideal for tagging fabrics. Using 5⁄ 16″ staples, plier is ideal for closing shipping bags (Jiffy padded and utility bags, Mail Lite, etc.). Especially useful for wrapping Dacron around foam cushions in furniture and upholstery shops. RAPID 1 STAPLES #24/6 Staples 1⁄ 4″ — 5,000 per box #24/6 Staples 5 ⁄ 16 ″ — 5,000 per box
STA311HP
STA5019 — 3 ⁄ 8″ Staples
RAPID 23 PLIER STAPLER
STA23HP
STA136 — 1⁄ 4″ Staples
STA138 — 5⁄ 16″ Staples
133
Furniture Supplies
SWIVELS
LAKEWOOD BALL BEARING SWIVELS
Lakewood ball bearing swivels have long been accepted by the leading manufacturers of quality wood furniture, wrought iron furniture, bar stools, dinette sets, and display racks because of their excellent performance, reliability and strength. The center-thrust flange on Lakewood swivels changes the customary rotating center rivet into a non-working part, eliminating binding and wear, therefore assuring a longer and trouble-free mechanism life. Extra deep ball races and reinforcing ribs provide additional stability and strength.
Ball Bearing Center Thrust Flange
Note the continuous ring of precision ball bearings under center thrust flange. This feature in Lakewood Swivels offers designers the ultimate in revolving fixtures for application whenever and wherever “Only the very best is good enough.”
SWA113
10 ⁄ ″ x 10 ⁄ ″
14 14
SWA7712
7″ x 7″
SWIVEL REVOLVING PLATES
ROCKER SWIVEL
SWIVEL ROCKERS
Five Legged Units SWP90S
Heavy gauge plates turn easily and quietly on ball bearings. Center rivet design. The balanced ball-bearing action is engineered to give the utmost in a free easy swing. ⁄ ″ high — 9″ round bottom plate — 71⁄ 2 ″ square top plate.
58
SRB4850 SW5053 SW2462
51⁄ 4″ high 6″ high 71⁄ 2″ high
RSW75
Combines swivel and rocker action. The swivel is our standard 71 ⁄ 2 ″ swivel. 12 per carton.
Recommended Application Std. Duty, Bar Stools, Lazy Susans, TV Swivels Std. Duty, Chairs Medium Duty, Bar Stools
6 6 12
Five Legged Units
SW2462S SWP36255 SWP26255 51⁄ 4″ high 35⁄ 8″ high 25⁄ 8″ overall height at front
Model No. SWA1330
Pitch Flat
Finish Plain
No.3⁄ 8″ Balls 8
Dim. A 53 ⁄ 4 ″
Recommended Application Std. Duty, Bar Stools or Chairs
25″ diameter leg span. Packed 10 per carton.
Return-O-Matic 180°
134
TACKS, TACKING STRIPS
VELVET EDGE ™ TACK STRIP
Tough, tempered steel Velvet Edge™ Tack Strip has softly rounded edges. It is gentle on your most delicate materials, and won’t snag or tear materials in assembly and shipment. With its slim profile, the Velvet Edge disappears under fabric. Seams look hand sewn. Available in pre-cut lengths 18″, 24″, 27″ and 30″ with #8, #10 or #12 oz. tack.
Plastic Tack Strip Cover
TACKING STRIPS
Slimline Tack Strip
Thin steel; deep cut serrations for greater holding strength. Ideal for lighter weight fabrics, plastics, leather. Available: #8, #10 or #12 oz. tacks; pre-cut 27″, 30″ and 36″.
#TAC8009
Clear polyethylene used to slide over metal tack strip to help eliminate tears in fabric.
Fiber Tack Strip
BLUED CUT OR UPHOLSTERERS
(Shown actual size)
Pressure-bonded with smooth, rolled outside edge. Exclusive one-piece fiber construction for fast application; straight and uniform edges. #8 oz. tacks; pre-cut to 27″.
U.S. Patent No. 3,008,173
Easy to Use Pli-Grip is so easy to use, relatively inexperienced workers can be trained in a matter of hours to turn out a job that would require a skilled craftsman if previous methods had to be used. No Waste Because Pli-Grip is supplied as a continuous strip there is no waste — you simply cut off the actual length you want, when you want it. Pli-Grip is undoubtedly the most efficient upholstery fastening ever devised. No Rusting or Staining Pli-Grip gives a clean, firm, tailored finish with or without welting, and can be used against wood trim, no matter how intricate. In addition it is galvanized to a smooth, satin finish to prevent rusting and staining. Factory test Pli-Grip for yourself – you will soon see that this new fastening method can benefit your production. Pli-Grip puts exactly the right tension on the fabric as you bend it into place, It is so flexible that you can follow radical compound curves without a wrinkle. Regular — 100 ft. rolls, 5 per carton Heavy — 100 ft. rolls, 5 per carton
Blued Upholsterers Tacks
2 21⁄2 3 4 6 8 10 12 14 16 18 Oz. Oz. Oz. Oz. Oz. Oz. Oz. Oz. Oz. Oz. Oz. 1 1 1 1 1 1 1 1 1 1 1 Lb. Lb. Lb. Lb. Lb. Lb. Lb. Lb. Lb. Lb. Lb. Pkg. Pkg. Pkg. Pkg. Pkg. Pkg. Pkg. Pkg. Pkg. Pkg. Pkg. &-25# &-25# &-25# &-25# &-25# &-25# &-25# &-25# &-25# Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk
Completely eliminates hand sewing no matter how radical the shape.
WEBBING, CLIPS
WEBBING
Nylon, polypropylene, polyester, cotton
Available in a variety of styles, weights, sizes and colors.
ATLAS RUBBER WEBBING
JUTE WEBBING
Keyston’s jute webbing is prestretched, which will mean no sagging and will give you a webbing of uniform quality. Compare with other brands and you will find that Keyston’s is truly the finest. 72 yards per roll; 24 rolls per bale. 31⁄ 2″ BFM 9# Weight is per roll — stocked in most Keyston locations.
2″ wide, 150 feet per roll, 30% stretch (recommended for seats).
MATRIX JUMBO 50 WEBBING
2″ wide brown elastic webbing
Specifically designed for high traffic area seating and automotive applications. Features: 1. Low elongations factors (10%). 2. Only elastic rubber webbing to date that has passed automotive testing and is used in passenger car seating. 3. Yields consistently a high resilient, yet non-sagging seat. Construction: Rubber filaments 24 gauge (3 per strand) polypropylene yarn.
RUBBER WEBBING
2″ and 2 ⁄ ″ — 55 Yard Rolls
14
ELASBELT At the heart of fine furniture…
Latex elasticized webbing: WEB250ED WEB650ED 2″ Back Webbing 2″ Seat Webbing 164 feet per roll 164 feet per roll
RUBBER WEBBING CLIPS
A precision-made clip is carried for fastening the webbing to the frame.
STANDARD SIDE RELEASE BUCKLE
1″, 11⁄ 2 ″ and 2″ (other sizes available – special order)
137
Furniture Supplies
WELT CORD
SYNTHETIC WELT CORD BRAIDED WELT CORD
The finest ravel proof cellulose cord available. Glass yarn covered for extra strength. Exact size shown. (Bleached white color)
4/32" 5/32" 6/32"
A welt cord made of urethane to give you an extremely uniform yet inexpensive welt. With nylon filler for no stretch or without nylon filler.
3 32
8/32" 10/32"
⁄ ″, 4⁄ 32 ″, 5 ⁄ 32″ and 9 ⁄ 32 ″
12/32"
JUTE WELT CORD
16/32"
DOUBLE WELT CORD
Furniture Supplies
5Ludlow’s Uniform Jute Welt Cord is the upholstering industry standard. The straight parallel winding preserves its roundness, evenness and uniformity. WT432JL - 4⁄ 32″ 1595 ft/rl WT532JL - 5⁄ 32″ 1595 ft/rl
The fastest way to achieve a beautiful and neat double welt at an economical cost. Extremely uniform — very easy to work with when used with the Folding Gage and Foot.
4 32
⁄ ″ and 5 ⁄ 32 ″
IMPORT ECONOMY JUTE WELT 10# spool
5 32
POLY TUBING WELT CORD
A firm no-stretch yet easy-to-bend welt. Available hollow or solid. ⁄ ″ ⁄ ″ 5 ⁄ 32 ″
3 32 4 32
⁄ ″ — WT532JI
750 yard spool 500 yard spool 500 yard spool
138
WORKROOM SUPPLIES
SINGLE CORD SHIRRING TAPE COTTON PIPING CORD
WS10820A1
—
3
⁄4″ Wide
—
White
FOUR CORD SHIRRING TAPE
Applications include pillows, upholstered pieces, table skirts, or any item that requires a full, finished edge. Put up in 10# spools.
WS60010 WS60012 WS60014 WS60018 #0 #1 #2 #4 ⁄ 32″ ⁄ ″ 8 ⁄ 32″ 12 ⁄ 32″
5 6 32